Question about Nissan Navara

Open Question

RESET SERVICE WARNING ON D22 - Navara Nissan Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I clear a service emissions message on a 2005 Mercury Mariner with a 3.0L engine. I have performed the required maintenance procedures at both 30,9000090's and 60,000miles. Still have message.

Warning Messages The warning messages can interrupt the display until cleared or reset by the driver. The warning messages are either single cycle, non-resettable, or repetitive warning messages.
The single cycle warning messages display once whenever the ignition switch is turned to the ON position or a fault occurs in a system, and can be cleared by pressing the RESET button. The single cycle warning messages are:
  • liftgate ajar
  • liftgate glass ajar
  • service emission system
  • low brake fluid
  • service brake system
  • check left headlamp
  • check right headlamp
  • check left turn lamps
  • check right turn lamps
  • check left high beam
  • check right high beam
  • check brake lamps
  • check parking lamps
  • washer fluid low
  • check fuel cap
  • change oil soon
  • change oil now
  • low fuel
  • service 4x4
  • turn signal on

Jun 15, 2016 | Mercury Cars & Trucks

1 Answer

I am getting a "Service TPMS System" warning. All tires are inflated above the 36psi threshold and there is no "LOW Press" warning, juat the service prompt. Is there a reset procedure that only the

There are places wanting your business that will offer a free code check. Even if you have to get an oil change or such, it's still a good deal. This gives you a chance to check out another mechanic. Dealers are always too expensive for service. This car is past waranty, right?

Nov 30, 2013 | 2006 Chrysler Town & Country

1 Answer

Nissan Clutch Problems

if this has original clutch this noise is a warning that it's time for a change

when doing this job make sure the clutch /throwout bearing/pressure plate and slave cylinder are all done at same time will save you money in the long run allthought being a bit expensive at first

Oct 20, 2013 | Nissan Pickup Cars & Trucks

1 Answer

I have a D22 nissan 2.5 tdi that does not rev over 2000 rpm

i had the same problem,,its an easy fix ,,simply change the fuel filter,,

May 21, 2010 | Cars & Trucks

1 Answer

1999 Passat: how to reset service now warning...


May 07, 2010 | 1999 Volkswagen Passat

1 Answer

How do i reset flat tyre warning light

To reset tyre warning
switch ignition on,press reset near gearlever
Don,t think connected

Feb 13, 2010 | 2006 Mini Cooper

1 Answer

How to reset service required warning

you need a diagnostic computer to reset it

Nov 08, 2009 | 2008 Jaguar X Type

1 Answer

How do you reset a low tire pressure warning on a 2008 Jetta?

Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.

Apr 30, 2009 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

Turn off the recommended service warning on a 2001 C240. t

I hope all you want is to reset the service indicator and this is how you do it.

Tum the key to position one, scroll using the arrows on your steering wheel until the service interval or indicator is shown,press the reset button for at least 2 seconds (the reset button is the one you use to reset the trip meter or increase and decrease light intensity of the dashboard). The display will ask you whether you want to reset service interval, press the reset button again and this will reset your service interval.

Mar 22, 2009 | 2002 Mercedes-Benz C-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides