Question about 2000 Dodge Durango
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
When engine running, ensure no engine combustion gas bubbles in coolant resevoir (if so, the head gasket is blown).
Check cooling fans are operating ok (when required when car warms up), if not check
2) relay operation,
3) heat sensor switch.
When re-filling cooling system, bleed off any airlock as necessary.
Check for collapsing (soft) coolant hose on suction side of waterpump when engine revs above idle.
Posted on Sep 01, 2009
1st try and search for a vaccum leak, due to the fact that these vehicles have had some bad problems with the length of wires and hoses, if there is a vaccum leak in the vehicle somewhere that will trigger other malfunctions in your vehicle. Using a can of starting fluid or Brake cleaner spray lightly spray around our engine til you hear the motor rev-up and the spot you have sprayed will determine where your vaccum leak will be. And then check under your distributor cap for any moisture be sure to take a rag and wipe and residue off. Also check the firing order on your distributor.
Posted on Oct 28, 2009
SOURCE: Engine Code P0505
After the IAC is replaced it is not enough to clear the code you must also reset the IAC learned adaptive. To do this you will need a higher end scanner like snap-on or such.
Posted on Jun 17, 2010
Tips for a great answer:
Apr 04, 2015 | 2003 Dodge Caravan
Dec 21, 2012 | 2003 Dodge Durango
Oct 01, 2012 | 2000 Dodge Durango
Jun 01, 2010 | 2005 Dodge Caravan
Feb 17, 2010 | 2003 Dodge Durango
Jan 30, 2010 | 2003 Dodge Durango
May 27, 2009 | 2003 Dodge Durango
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: