Question about 2006 Ford Fusion
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Differential bearing caps 70-85 ft lb
Ring gear bolts 70-85 ft lb
Pinion bearing preload if using original bearings 8-14 lb-in, if installing new bearings 16-28 lb-in
Posted on Jan 30, 2009
SOURCE: specs for a 1997 Ford Ka 1297 cc
If the vehicle is fitted with a Rocam engine, the valve clearance is not adjustable, hydraulic lifters.
The camshaft caps are torqued in two stages, first 10Nm and than 90 degrees
Posted on Apr 20, 2009
SOURCE: head bolt torque spec
Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.
Posted on Aug 16, 2009
looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!
Posted on Sep 18, 2009
Tips for a great answer:
Nov 06, 2015 | Cars & Trucks
Nov 15, 2014 | Cars & Trucks
Jun 01, 2014 | 2003 Ford Taurus
Sep 27, 2013 | 1992 Ford Ranger
Aug 11, 2012 | Cars & Trucks
Nov 13, 2011 | Cars & Trucks
Dec 17, 2010 | 1997 Ford F350 Crew Cab
Oct 19, 2010 | 1990 Ford Bronco
Dec 05, 2009 | 1988 Ford F 150
May 04, 2009 | 1994 Ford Ranger Supercab
Feb 05, 2017 | 2006 Ford Fusion
67 people viewed this question
Usually answered in minutes!