Question about 1994 Hyundai Excel

1 Answer

Car stalls after car has been running for 1 or 2 min it stalls after you put it in gear, why?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

Can be the fuel pressure valve, the engine light comes on? also water on the system, or perhaps fuel filter or spark plugs

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Excurtion will start normal, but stall when putting in gear (reverse) or braking. When re-starting it runns ok until next braking.


Have the catalytic converter checked at your local muffler shop...clogged...worn out...Hope this helps.

Mar 12, 2014 | 2005 Ford Excursion

1 Answer

96 chevy s10 v6 stalls after i start it up


This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Oct 18, 2012 | Cars & Trucks

1 Answer

1996 mercedes c280 dies when put in drive


Engine stalls or RPM fluctuates at idle up and down or dies near idle.

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Oct 15, 2012 | 1996 Mercedes-Benz C-Class

1 Answer

I have a F250 lariat with a 460 - truck stalls when I put it in gear - even after it runs for 20 min. Sometimes it will stall while I'm driving. I had carborator replaced last year. Hope you can help.


Some possible causes could be:

Vacuum leaks cause an engine to run lean witch can cause the vehicle to stall when put into gear.

Improper base idle adjustment can cause the vehicle to stall when shifted into drive or reverse

A malfunctioning or damaged carburetor can cause the vehicle to stall when shifted into drive or reverse

Improper ignition timing can cause the vehicle to stall when shifted into drive or reverse.

A malfunctioning or damaged transmission or torque converter can cause the vehicle to stall when shifted into drive or reverse

Oct 31, 2010 | 1987 Ford F 250

2 Answers

Car runs but when put in gear stalls


if your car stalls or trys to lerch forward when stoping at a light or stop sigh, then your over drive is loked meaning you need to have your transmition serviced or the electrical to the lockup solinoide needs to be checked

Apr 12, 2010 | 1996 Pontiac Sunfire

1 Answer

1990 Pontiac 6000 2.5 after driving, car stalls when put in gear.


You need to replace the TCC solenoid under the side cover pan of the transmission. You can also unplug the wires that go to the transmission in the front. After that it will not go into overdrive but it will stay running at stop lights untill you have it repaired.

Sep 28, 2009 | 1990 Pontiac 6000

1 Answer

Car wants to stall while driving


Check for trouble codes first thing, It could be a number of things. example, mass air flow sensor, map sensor, crank sensor, ignition module. Check for codes first to see if there are any. That will help you get on the right track

Jul 26, 2009 | 1991 Oldsmobile Cutlass Ciera

1 Answer

2001 gmc jimmy 4.3l.idles low and will stall when put into gear unless engine is reved up a little.


Clean the Idle air control valve (IAC), it's located by the throttle body so the best thing to do is give the throttle body a good cleaning with throttle body cleaner. Do not use carb cleaner, it's to corrosive for the gaskets used on the throttle body's. Just follow the instruction on the spray can and after your done putting everything back together. Turn the ignition key's to the run position for 10 seconds and then off for 10 seconds to reset the IAC. Start the engine and let idle for 1 min and go for a test drive. If that does not work, turn the ignition to the run position and pull the ecm(BATT) fuse out for 30 seconds and then place it back in start te engine. The engine may stall but let it, don't touch anything. Just start it again and let idle for 1 min then go for a test drive. The ECM is just relearning the sensors like the first time the jimmy was driven off the assembly line. Good luck and hope this helps. Keep me posted be glad to get your jimmy running 100%. 

Jul 06, 2009 | 2001 GMC Jimmy

1 Answer

2000 durango 5.2 cold starts, engine stalls or rpm surging


i know this may sound stupid but if your battery is old or a little weak on this vehicle the idle air control solenoid will act speradicley hunting for were it should be and the vehicle will stall.replace battery

Jan 31, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
1994 Hyundai Excel Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...