SOURCE: location of the fuel filter on 2006 saturn vue
I believe the filter is actually a part of the fuel pump module. You have to replace the whole thing. You can contact Saturn parts to verify this.
SOURCE: rattle sound front driver side wwhell
You are probably hearing the front stabilizer links going out. they are ball jointed on both ends and run to the struts. When they start to go, they thump a lot over small holes and cracks in the pavement.
Also the lower control arm bushings may be at fault, especially if you have had a fender bender. I would start with the stabilizer links (it's a do-it-yourself project) and then go from there.
A good way to check the links is to have someone rock the truck side to side while you hold the link (reach around the back of the tire and grab it) if you feel play in it or it moves too easily or is disconnected or broken, you need to replace it.
SOURCE: is it true that the 2006 saturn vue has a honda
Only the V6 Engine is made by Honda. The I4 is made by GM.
Honda agreed to supply GM with some of their engines in exchange for GM supplying them with some diesel engines
Testimonial: "yes - this info was helpful"
SOURCE: fuel filter location on a 2006 saturn vue 4
The fuel filter is in the primary fuel tank on your vehicle.
SOURCE: change fuel filter on a 2006 Saturn Vue. V4.
How to Replace a Fuel Filter
DIY & Save up to $123.86 (Complexity: Moderate / Time: 1.4 hours)
Parts:
1. Fuel Filter - $115.14
Tools:
1. 3/8 in. Drive Ratchet - $7.55
2. Hose Pincher - $5.84
3. Flare Nut Wrench - $5.53
4. Flat Head Screwdriver - $3.14
5. Socket Set
Steps:
Step 1
Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
- Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.
Step 2
If the fuel filter has a clear case, inspect the filter element for dirt.
Step 3
If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
- Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.
Step 4
Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.
Step 5
Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.
Step 6
Start the engine and check for fuel leaks.
Step 7
Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.
Hope thats help (remember rated this help). Good luck.
246 views
Usually answered in minutes!
×