Question about Vauxhall Vectra

Open Question

Problem with 2002 vuxhall vectra showing CODE P0100 AND P0340 no plugs are sparking hence they are all new

Cambelt changed, air filter, oill filter, engine flashed, new oil, timing ok, did start before assembling it and after assembling it started ok. fuel pumping ok but no plugs sparking now, no electrical charge coming to plugs now showing code p0100 and p0340

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: obd scan code p0340 and p0100 and p0170 and p0134 and p0501

What you have is a real mess

You have so many different codes that aren't
even related, that I 'am not going to list them

You need a repair shop or dealer

You have air flow,couple oxygen sensor,cam sensor
speed sensor,real nightmere

I would look for something simple or some common
denominator.

I have no idea where I would start on that

Obviously, I would have to road test & use the scan tool
to check data, but I think all those codes are squed somehow
eg: not doing you any good

Posted on Jun 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 mitsubishi galant 1 and 4 spark plugs no spark ....i need help . . i change the coil and plugs already still no spark..


Look more closely at the 1 and 4 coil, also, check for trigger signal to these coils. I mostly suspect the trigger unit.

Dec 04, 2014 | 2002 Mitsubishi Galant

1 Answer

Vectra 2.2


Hi my vectra did this and didn't show a fault code it's the crank shaft position sensor located behind the starter motor on the front of the engine the sensor is about 30 pound mines never cut out sins i change my spark plugs and coil pack to trying to figures out who knew it was a little sensor it through a your crank shaft outta wack and it throws through a lot of petrol otta timing cheers scott

Aug 31, 2012 | Vauxhall Vectra Cars & Trucks

1 Answer

Obd scan code p0340 and p0100 and p0170 and p0134 and p0501


What you have is a real mess

You have so many different codes that aren't
even related, that I 'am not going to list them

You need a repair shop or dealer

You have air flow,couple oxygen sensor,cam sensor
speed sensor,real nightmere

I would look for something simple or some common
denominator.

I have no idea where I would start on that

Obviously, I would have to road test & use the scan tool
to check data, but I think all those codes are squed somehow
eg: not doing you any good

Jun 06, 2012 | 2006 Kia Rio

2 Answers

Reduced engine power


New fuel filter, Spark Plugs & Wires, New air filter.
Tires at max cold psi.
Use a bottle of injector cleaner and change oil every 3k

Aug 19, 2009 | 2002 GMC Envoy

1 Answer

Hi, I have Nissan sentra 2002 gxe. After how many miles should i give the car in service? Which kind of service should I ask for? Thanks


Every 10,000 miles partial service; change engine oil and filter, air and fuel filter's, spark plug's and check brakes fluid pipes and pad's. Every 50,000 full service. partial service plus change cambelt, check gear diff and power steering oils. Owners manual or any mechanic will let you know oil grades etc.

Aug 06, 2009 | 2002 Nissan Sentra

1 Answer

2002 Mits Galant has a hard time to start


Your P0340 is a different problem from your P0303, but they may be related.

Since the code P0340 indicates that there is something wrong with your cam speed sensor, your misfiring in cyl3 may be caused by this.

This points to addressing the P0340 error before the P0303 since it could be contributing to the 303 in the first place. Look at your cam speed sensor in cyl3 and maybe this would solve both problems at once.

Hope this helps.

Jun 30, 2009 | 2002 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vauxhall Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Are you a Vauxhall Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...