Question about 2000 Hyundai Accent

1 Answer

Car giving a hard start

My car is hard starting and when you shift to drive or reverse it cuts off what is the problem and the solution

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 60,769 Answers

Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After ideling a while i try to shift into reverse or to drive and it always dies .......any tips or ideas?


engine dies when shifting into reverse or drive - Third Generation ...

www.thirdgen.org/forums/tbi/346079-engine-dies-when-shifting.html
Feb 11, 2006 - engine dies when shifting into reverse or drive ... After it dies it starts right up and idles fine in park or neutral. ... these ignition items because you weretrying to cure the stalling, or, did the stalling occur after you replaced these items? ...The only thing that kept the car running was adjusting the Idle screw up.

Engine Dies When Placed In Gear***Split from Spittybug...EFI ...

dmctalk.org > ... > MAIN FORUMS > Custom DeLoreans/Mods > EFI

Jul 5, 2012 - 18 posts - ‎4 authors
Just to give an update on my car - I've been having an issue with the car stalling when moving from Park into Reverse or Drive (I have automatic). ... I have been playing with the idle advance trying to get more ... I put in the remainder of the AT fluid I had on hand and the car never died on shifting after that.

starts but dies when shifted into drive or reverse - Suzuki Forum


Jan 26, 2016 | Cars & Trucks

1 Answer

Transmission make loud sound when put it in revers


PLEASE HELP! SOS! car starts but doesnt move! - Club3G Forum ...

www.club3g.com > ... > Performance & Tech Forums > Problem Reports

Nov 16, 2010 - 61 posts - ‎14 authors
now yes, i will take the transmission is fubar into consideration but theres an .....however... idk about my cv joint, my car ONLY would make a loud ping noise when i move from a stop or brake ..... almost always when i put it into reverse. such as an engine mount sound, ... Vehicle: 2004 Eclipse Spyder GT. Loud knocking sound after oil change..
14 posts
Sep 20, 2010
Horrible noise upon start when cold
21 posts
Dec 24, 2009
Sporty knocking.. Oh noez!!one!!1!
16 posts
Mar 22, 2006
More results from www.club3g.com

Loud thump when I shift into drive or reverse - CarGurus

www.cargurus.com > Questions > Chevrolet > Cavalier

CarGurusDec 19, 2012 - And while driving loud thump when car motor shifts th... ... Bad throttle position sensor can trip both lights and make the transmission shift at high rpms and shift hard even under light acceleration. .... the transmission will shift hard when firstput into reverse or drive ... 2004 Chevrolet Cavalier LS For Sale.Missing: mitsubishi ‎eclipse

Mitsubishi Transmissions & Drivetrains Repair Questions ...


Dec 06, 2015 | 2004 Mitsubishi Eclipse

1 Answer

I have a 2002 Ford Ranger it's cuts off when stoping hard and then I have trouble getting to stay running after starting back up and putting it in drive


My work truck run great until you put it in gear it would die it jerked hard in reverse like it was missing . And it was the shift telay

Apr 05, 2015 | 2002 Ford Ranger

1 Answer

Running ruff no power


tune up,fuel filter,air filter,clog catalytic con.,coils.

Mar 07, 2013 | 1989 Buick LeSabre

2 Answers

1999 FORD EXPERDITION TRANSMISSION WON'T MOVE FORWARD BUT MY REVERSE WORKS FINE WHAT I NEED TO DO


You can try shifting into manual 1 to get moving then once you get going shift the lever up into Drive. This should work, then drive it to a shop to have your ****** looked at.

Feb 08, 2012 | 1999 Ford Expedition

1 Answer

Volvo 2006 S60 refuses to move in reverse direction


your problem lies in the internal parts of your transmission which are the clutch linings, they are already worn out and starts to slide.

May 28, 2010 | 2002 Volvo S60

2 Answers

When I drive my 2000 monte ss in the summer after a while it will start shifting hard. I installed a trans cooler and it helped with the problem but it didnt cure it. I have heard about a pressure control...


Shift suddenly become very hard. When going from park to either reverse or drive it slams into gear. 1-2 and 2-3 shifts are also harsh. All gears seems to work. Problem may be intermittent: Check TPS for smooth electrical response. If the response is jumpy or erratic at all, replace TPS.

Start with checking your TPS and if that is good then it could be your EPC (electronic pressure control) solenoid. Easy fix in the pan.

Thank you for using Fixya and good luck.

Apr 01, 2010 | 2002 Chevrolet Monte Carlo

1 Answer

Shifting hard in reverse & delay shifting in drive


Hi

It sounds like the torque converter is packing up. best way to tell is to take the hand brake off put the car in drive when parked and lift your foot from the brake, if the car starts to creep forward by its self "no throttle" then its most likely the torque converter.

Its an expensive part and they always seem to go around the mileage you say the car has.

In the UK they are around £400 average price but may be cheaper in the US.

I would normally say check the fluid but as you say its been done then, no point.

other possibilities are the slave cylinder for the fluid not functioning correctly. thats about £50 in the UK.

And lastly the gearbox it's self. Its quite unlikely from what you have said but still get it checked out if you think thats the cause.

Hope this is helpful.

Jan 20, 2010 | 1996 Dodge Neon

2 Answers

WHEN YOU PUT THE CAR IN DRIVE IT WILL NOT GO ANYWHERE


Its the electronic shift control located just under the battery ontop the transmission replace or repair will solve the issue

it'll go into drive but once it reaches 1500 rpm it'll drop into neutral as a safety because at this rpm it is being told to shift gear and when it fails to do so it safely goes into neutral

it will go into reverse just fine and park and you can run all the low drive gears until you reach 1500 rpm then it'll cut it off

i pulled mine out re soldered bad components on the board to fix it but im an electronics engineer it may be easier for you to just replace it

Aug 09, 2009 | 1995 Dodge Avenger

Not finding what you are looking for?
2000 Hyundai Accent Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...