Question about Ford Fairmont

Open Question

Brake pedal hard no brakes on my 1995 ef ford

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 141 Answers

SOURCE: 1989 ford thunderbird standard brake system has hard pedal

You are correct in the assumption that the power assist is the problem. The brake booster has either failed completely or has a broken vacuum line. Please check that the booster lines are intact and if so, get yourself a new booster.

Posted on Jan 16, 2009

Ad
  • 114 Answers

SOURCE: Hard Brake pedal in '93 Dodge Caravan

Is the engine also running poor such as tries to stall or the RPM is high? Is there an unusual suction type sound? Check the vacum hose to the brake booster, if loose, cracked or a hole in it.
This is about a 1/2" diameter hose and goes to the booster from the engine for power brake assist.

Posted on Mar 22, 2009

co7196
  • 3433 Answers

SOURCE: hard brake pedal hear air leaking when pedal pushed

When you press on the brake? Have your brake vacuum assist checked. It,s that bigspaceship looking thing between the brake master cylinder an firewall. good luck and be safe.

Posted on May 25, 2009

  • 3600 Answers

SOURCE: 1997 FORD F250 XLT 4WD - Had a hard brake pedal with hardly any brakes while standing on them. Replaced booster and wheel cylinders at same time now the pedal is mushy and no brakes.

They need to be bleed again all four wheels but your vacuum pump may be bad since diesels don't have vacuum then have to have a pump, check that the booster one way check valve is good if you can blow thew it both ways it's bad, to bleed start from the wheel farthest away from the master cylinder pump the brakes 5 times and hold down then open the bleed valve keep doing this until you get clear fluid out of each wheel once you have done that if it is still mushy and you know you have vacuum re bleed with engine running this will help push more out with power assist. most like the hard brake pedal had to do with no vacuum check out the pump. You may also have to reset the 2 way check valve if you need help with this let me know.

Posted on May 28, 2009

almanzar87
  • 22 Answers

SOURCE: Hard break pedal

there is a bulletin in ford motor company about a vacuum hose from de brake system this hose dosn't have clamp and the new has it you need to take your mark lt to a dealer. you can see the hose under the truck beside the TR sensor a litte upper. sorry my english is bad

Posted on Aug 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 ford f250 brakes are hard to push and dont work very well


Brake booster is bad or there is some kind of blockage in the vac lione running to the booster.

Mar 07, 2014 | Ford Cars & Trucks

1 Answer

95 f350 hard brake pedal


did you get your brakes fixed? If so what was wrong?

Nov 05, 2011 | 1995 Ford F350

1 Answer

Brake pedal hard to press down,1995 ford fairmont


chek a vacuum hose or the boster valve , maybe brake fluid inside the brake boster

Aug 11, 2010 | 1983 Ford Fairmont

1 Answer

1995 ford taurus, brake lights not working also


Sounds like the brake switch is bad.

May 19, 2010 | 1995 Ford Taurus

1 Answer

Stop light switch wire harness


The brakes lights work off a brake light switch mounted very close to the brake pedal. If you have cruise control it will be a duplex switch with two harnesses attached to that switch on the bracket between the steering column and the brake pedal bracket

Apr 03, 2010 | 1995 Ford Taurus

2 Answers

There is no brake lights and its very hard to shift to drive


brake switch located under dash just in front of the brake pedal arm.... I just replaced mine

Oct 12, 2009 | 1995 Ford Aerostar

1 Answer

Brake pedal stuck


bleed them plus you have to chang eboth sides

Jan 15, 2009 | 1995 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...