Question about 2002 Mercury Grand Marquis

Open Question

Need to no were the starter relay is on my 2002 mercury marquis

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 328 Answers

SOURCE: mercury grand marquis

it is on the fender near the battery and is also referred to as the starter solenoid (if you follow the large wire from the positive terminal of the battery at the other end will be your relay/solenoid)
hope this helps!

Posted on Feb 28, 2009

emissionwiz
  • 75066 Answers

SOURCE: 2002 mercury mountaineer 4.0 starter relay location

The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
The starter relay is in position #56 of that box.

Posted on Mar 23, 2009

  • 226 Answers

SOURCE: need to change starter

Should be under the engine on the passenger side of the engine right next to the transmission. It is about the size of large size juice can, is normally black with a smaller rounded thing with wires attatched called the soinoid. Most ford soiniods have an unplug plastic connection. You need to unhook all wires, and I think this starter has two bolts while a few have 3. Dont know which engine you have, so I am just giving you the general information. You will need tools like sockets, socket extension, rachet, a hand wrench set will also maybe come in handy as well as a couple of screwdrivers like at least one of each. Normally you will need to jack up and block the car up and put on jackstand as well as setting the brake, putting in park, and blocking all wheels also. You can look on the autozone website in the repair section to help, and you can also buy a complete starter from the parts house which will tell you the bolt locations, what it looks like, etc. hope this helps you, rick

Posted on May 04, 2009

  • 1986 Answers

SOURCE: how do I adjust headlight beam on 2002 grand

a screwdriver or a socket

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

  • 564 Answers

SOURCE: how to replace starter +1993 Mercury Grand Marquis

disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,

Posted on May 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram of relay box under the hood identifying the fuel pump relay on 2002 grand marquis


Fuel pump relay, 4.6L System overview
Relay center box 1, wheelwell, front, LH side

Aug 12, 2016 | 2002 Mercury Grand Marquis

1 Answer

1991 mercury grand marquis will not crank or turnover.


Starter issue? Try rapping the starter a few times with a hammer.

Feb 17, 2013 | 1988 Mercury Grand Marquis

1 Answer

1985 mercury grand marguis hace power but, will no start


If you have no circuit to the coil your problem is that you need a new ignition module.

Sep 25, 2009 | 1985 Mercury Grand Marquis

1 Answer

Today my 2002 mercury grand marquis would not start, not a sound. ran fine previously


Had same problem after replacing starter relay and ignition switch then starter itself a local (non dealer ) mechanic found corrosion under fuse block under hood that was causing intermittant starting. could be typical problem.

Jul 03, 2009 | 2002 Mercury Grand Marquis

2 Answers

2002 mercury mountaineer 4.0 starter relay location


The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
The starter relay is in position #56 of that box.

Mar 23, 2009 | 2007 Mercury Mountaineer

1 Answer

Mercury grand marquis


it is on the fender near the battery and is also referred to as the starter solenoid (if you follow the large wire from the positive terminal of the battery at the other end will be your relay/solenoid)
hope this helps!

Feb 28, 2009 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
2002 Mercury Grand Marquis Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...