Question about Chrysler Town & Country

Open Question

2005 Chrysler Town and Country flickering lights

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: door locks

Daughter had same problem on '05 T&C. Neighborhood mechanic searched Internet and found 80-90 others with same problem right around 40,000 miles. Free solution was to pull yellow 20A IOD fuse in right front corner of fuse box under hood, wait 10 seconds, then reinsert fuse. Should solve problem as long as you don't lock doors with FOB. You can unlock doors with FOB, but apparently locking with FOB causes the problem.

Permanent solution is to have dealer reprogram computer for around $50 which is what my daughter chose to do because of inconvenience of not being able to lock doors with FOB when getting baby/carseat out of vehicle.

Posted on Dec 07, 2008

Ad
chryslertech
  • 115 Answers

SOURCE: low speed fan relay for the 2005 chrysler town and country

If you are talking about the cooling fan relay for the radiator there is no low speed and high speed relay. There is only one relay and it is behind the grill revitted to the bumper rail. It is doesnt look like you typical relay.

Posted on Mar 08, 2009

keemo68
  • 1263 Answers

SOURCE: radiator fan relay,2001 chrysler town country

the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays

Posted on May 08, 2009

  • 117 Answers

SOURCE: 2005 crank position sensor location

The crank shaft sensor on that model should be on the driver side towards the back of the tranny its not hard to get to.

Posted on Jun 27, 2009

  • 3 Answers

SOURCE: 2007 Chrysler TOWN AND COUNTRY.. OVRHEAD MAP

I had the same problem on my 07 and it turned out to be caused by the bulbs getting too hot and melting the surrounding plastic which opened the circuit powering them. I was able to fix the problem by removing the bulbs and cleaning the sockets allowing the bulbs to seat correctly. The lenses snap off to give you access to the bulbs. If you are not familiar with how interiors of cars come apart, I would not suggest doing it as you may crack the lens.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear brake lights not working 2005 chrysler town and country


check fuses but first refer to owners manual to see proper disconnection of battery neg. first -- obtain acess to brake lights and use dvom ''digital volt ohm meter '' to test continuity to brake lights

Dec 15, 2011 | 2005 Chrysler Town & Country

1 Answer

Chrysler 2005 town and country mini van dash lights flicker, gauges go crazy, car shuts off no warning. Changed battery and alternator???


its the positive wire that goes to the fuse box from the battery. its crimped into the main positive wire. it needs a better connection.

Sep 08, 2010 | 2005 Chrysler Town & Country

2 Answers

Check engine light comes on. odb2 code P2096 What does it mean


WHAT EXACTLY MEANS THE CODE P2096 AND HOW I SHOULD FIX IT CRYSLER 300 2010

Apr 24, 2010 | 2005 Chrysler Town & Country

2 Answers

I got the ABS Light on my 2005 Chrysler Town and


Stop at a Tuffy or other shop and they can scan for codes to tell you which sensor may be faulty. Wheel sensors are easy to replace.

Apr 09, 2010 | 2005 Chrysler Town & Country

2 Answers

Flickering dash lights and erratic guages in 2005 town & country


check to see if wire to altenator is not loose. I had a simillar problem, and thats what it was.

Oct 07, 2009 | 2001 Chrysler Town & Country

1 Answer

Describe your 2005 Chrysler Town &


check the bulbs do not have fractured filaments,and check the headlamp relay.check the sockets for corrosion and if all that checks out ok check the connection on the back of the headlight switch and the daytime running light module

Aug 15, 2009 | 2005 Chrysler Town & Country

1 Answer

2005 Chrysler town & country touring won't turn over.


Sounds like you need a starter, or you have a loose wire somewhere under the hood.

Apr 25, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...