Question about 1985 Chevrolet S-10

1 Answer

How to unlock 1985 chevy s10 with out key

Lost keys

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

A box lighter and a wire coat hanger

Posted on Jan 10, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mechanicm639
  • 253 Answers

SOURCE: lost key to 1998 Chevy S10 Need to remove&replace tumbler w/o key

With the title and an insurance card your dealer can cut a new key by the VIN if you have never replaced the lock cylinder before. If not it will be remove the column covers, drill out the lock and try not to damage the lock housing. Good Luck

Posted on Jun 22, 2009

emissionwiz
  • 75066 Answers

SOURCE: Ignition will turn when key is inserted 1996 Chevy S10

Maybe the steering wheel lock causing this problem, try rocking the wheel left to right and back the other way, if that doesn't work the lock cylinder is defective and must be replaced.

Posted on May 21, 2009

  • 1596 Answers

SOURCE: I need to replace the fuel pump in my 1985 Chevy S10 Pickup.

EXACT PROCEDURE ! Please Rate Me Fairly for this!! Thank you And Good Luck !!


ELECTRIC PUMP

REMOVAL

  1. Before servicing the fuel pump the fuel system pressure must be relieved. See: Fuel Pressure Release
  2. Disconnect the negative battery cable.
  3. Raise the car on a hoist.
  4. Remove the fuel tank. See Fuel Tank / Service and Repair.
  5. Remove the fuel tank sending unit and pump assembly by turning the cam lock ring counterclockwise. Lift assembly from the fuel tank.
  6. Pull the fuel pump up into the attaching hose while pulling outward away from the bottom support. Take care to prevent damage to the rubber insulator and strainer during removal. After the pump assembly is clear of the bottom support, pull the pump assembly out of the rubber connector for removal. NOTE: Inspect the fuel pump attaching hose for any signs of deterioration. Also check the rubber sound insulator at the bottom of the pump. Replace damaged or deteriorated parts.
INSTALLATION
  1. Push the fuel pump assembly into the attaching hose.
  2. Position the fuel tank sending unit and pump assembly into the fuel tank. Use a new "O" ring seal. NOTE: Care should be taken not to fold over or twist the strainer when installing the sending unit as this will restrict the flow of fuel. Also, verify that the strainer does not block the full travel of the float arm.
  3. Install cam lock over the assembly and lock by turning clockwise.
  4. Reinstall fuel tank.
MECHANICAL PUMP

REMOVAL and INSTALLATION

NOTE: To ease pump installation, rotate the camshaft so the camshaft eccentric is out of the way of the fuel pump rocker arm.

  1. Disconnect fuel lines from fuel pump.
  2. Remove fuel pump mounting bolts and the fuel pump.
  3. Remove all gasket material from the pump and block gasket surfaces. Apply sealer to both sides of new gasket.
  4. Position gasket on pump flange and hold pump in position against its mounting surface. Make sure rocker arm is riding on camshaft eccentric.
  5. Press pump tight against its mounting. Install retaining screws and tighten them alternately.
  6. Connect fuel lines. Then operate engine and check for leaks.

Posted on Mar 22, 2009

  • 79 Answers

SOURCE: fuel pump on 1985 chevrolet blazer s10 location..where is it??

gas tank

Posted on Mar 22, 2009

emissionwiz
  • 75066 Answers

SOURCE: changing key cylinder

go to link the year is diff but the procedure is the same. scroll to bottom of page

http://www.2carpros.com/forum/1994-chevy-s-10--ignition-lock-cylinder-vt197051.html

Posted on Sep 09, 2009

Testimonial: "thank you so much. got just what i needed"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does an 87 chevy suburban have a chip (not an ecm) for the tbi? And if so where is it located?


Chevy Suburban replacement key ? Mile High Locksmith ™

www.denver-locksmith.net/2013/.../replacement-key-for-chevy-suburba...
If you have lost your key to your Chevy Suburban, and have no spare, the cost of ... 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, ... and 2013 then your Chevy Suburban will require a transponder chip key.

Chip it! Finale- - YouTube

? 3:41
https://www.youtube.com/watch?v=CSFR7XldItE
May 23, 2010 - Uploaded by pearsonba350
Final installment of my Jet Performance chip install on my '94Chevy truck. ... Just throwing it out there i ...

Nov 19, 2015 | Cars & Trucks

1 Answer

Lost original chip key for 2002 Chevy Tahoe and it won't start with replacement key


Some times the second set of keys will only unlock the doors you'll have to go to a dealer or call Chevy to get another key sent to you

Apr 07, 2014 | Cars & Trucks

2 Answers

No power to anything


sounds to me the rod from key switch to starter/ign switch is not where it should be. it probably slipped out when you had the key switch out. 23075457-awhy2tj3hoeu5futbuxdq4rw-3-0.png

Jan 23, 2014 | 1996 Chevrolet S-10 Pickup

1 Answer

We have a 1985 Volkswagon Cabriolet that we had one set of keys for and now have lost. The key to the gas cap was lost with it! Any suggestions on what to do????


Gas cap locks are rather crude ,almost any cap lock key
will unlock another,just wiggle the key like a lock pick,most likely will open. Any key thet will fit in the cylinder

Sep 19, 2011 | 1987 Volkswagen Cabriolet

1 Answer

Will a 1985 S10 blazer tilt steering collum fit a


yepper! lol i have owed 5 of this geneation and both the s-10 and blazer are identical in the dash, engin and drive train

Jun 05, 2010 | 1988 Chevrolet S-10

2 Answers

Spark plug order to distributor


For a 1985 Chevy S10 with a 2.8L engine the firing order is: 1-2-3-4-5-6 The Distributor rotation is clockwise.Take off the cap and bump engine till the rotor points to the no. 1 plug. this is the no.1 contact on the cap. follow rotation around the cap in order. {ie. 2,3,4 ect.} hope this helps.

Oct 12, 2009 | 1985 Chevrolet Chevy

1 Answer

Changing key cylinder


go to link the year is diff but the procedure is the same. scroll to bottom of page

http://www.2carpros.com/forum/1994-chevy-s-10--ignition-lock-cylinder-vt197051.html

Sep 09, 2009 | 1985 Chevrolet Chevy

1 Answer

No spark


MANY PROBLEMS WITH THE HALL EFFECT SENSOR AND IGNITION MODULE LOCATED IN THE DISTRIBUTOR......ALSO CHECK FOR POWER ON COIL....KEEP IN MIND THE COILS GO BAD ALOT ALSO

Jun 06, 2009 | 1985 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...