Question about 2007 Hyundai Entourage Limited Minivan

Open Question

How do i program my 2007 hyundai entourage remote key fob

Purchased new remote key fob and need to program to vehicle

Posted by Anonymous on

4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 75744 Answers

SOURCE: how to program key fob for 2011 hyundai santa fe

The remote can't be programmed at home, it takes a special electronic tool to do the job.

Posted on Jun 08, 2012

  • 62 Answers


If the engine is still not warmed up yet and you take off like a bat out of hell, they will misfire occasionally. If it is a frequent problem change the spark plugs.

Posted on Jan 27, 2010

  • 33 Answers

SOURCE: I purchased the 2007 Hyundai Entourage with dual

no you wil not have to reprogram if you examine the unit and establish how you are going to change battery quickly.
you have about a minute to change the battery and the unit will retain the info.
if you lose the info you can obtain a sequence code that you can perform yourself.
it is usually a system of key in and out and a number of turns in time within the ignition

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Programming key fobs for a 2007 Silverado

If Your 2007-2010 Silverado Has a VIC - Vehicle Information Center Step 1: Sit in the vehicle with all the doors closed and unlocked. Start your Silverado and leave it in Park.
Step 2: Press and hold the Vehicle Information button, marked by an image of a car and the letter "i", until the display reads "Press V to Relearn Remote Key".
Step 3: Press the Set/Reset button until "Remote Key Learning Active" appears.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If Your 2007-2010 Silverado Doesn't Have a VIC - Vehicle Information System Step 1: Sit in the vehicle with all the doors closed and unlocked. Turn the key to Accessory Power position.
Step 2: Press the trip odometer meter reset stem repeatedly until you see "Relearn Remote Key".
Step 3: Press and hold the trip odometer meter stem for three seconds. The display will read "Key Learning Active".
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).

Nov 02, 2016 | Chevrolet Silverado Cars & Trucks

1 Answer

Horn used to sound on double lock door button on key fob. somehow is now deactivated. how do i fix?

Do you have an owners manual? Go in there and find the instructions for the VIC (vehicle info center), the option to turn on the horns or leave them off is in the programming you can change.

Aug 14, 2016 | 2007 Hyundai Entourage Limited Minivan

1 Answer

I need to find out where the valet/override button is located on my car....trying to program a new keyless remote

1. Insert key into the ignition and turn it to the On or ACC position, turn off radio. (do not start the vehicle)

2.Press and hold DISP button on radio until settings is displayed.

3. Press Seek until FOB PROG is displayed .

4. Press Prev or Next and BEGIN will be displayed

5. Press DISP and programming will begin when PUSH FOB is displayed. Press and hold Lock and Unlock together until vehicle chimes. This will signal successful programming. May have to hold buttons up to 20 seconds. Hold Lock and Unlock on additional remote until vehicle chimes again.

6. Exit programming mode. Scroll to Exit and press DISP to exit programming.

If you don't have the original radio, it can be done with a scanner.

Mar 19, 2016 | 2004 Chevrolet Chevrolet Impala

1 Answer

4x4 diesel. Why can't doors be unlocked or locked?

their is a way to do it but recheck battery first sometimes the relearn process doesnt work or the fob itself is dead also if auto /remote start will need dealer to flash fob ---- 2002 santa fe and followed programming instructions and eventually was able to program the new remote. But, I did not realize I had to program my existing remote at the same time. Since, I have retried programming both remotes many times with no success--the new one works, but the old one won't. The instructions were: 1) Locate switch under dash, behind fuse box; 2) Turn ignition switch on, but don't start engine; 3) Wait 5 seconds, set memory switch to SET position; 4) Press remote LOCK button; press second remote transmitter LOCK button; 5) Set memory switch to OFF; 6) Switch ignition OFF. 7) Confirm programming by locking and unlocking vehicle.
Remote Key Programming Hyundai Forums Hyundai Forum

Sep 23, 2015 | 2003 Hyundai Santa Fe

1 Answer

How to program keyless remote

We have owned six Hyundai vehicles and sadly all have required the dealer to program a new remote for them. They do it in minutes using a special computer program so they usually did not charge much for it - so was not too bad.

Jan 13, 2015 | 2007 Hyundai Entourage Limited Minivan

1 Answer

Key fob remote does not operate

key fobs are programmed with the engine CPU unit and it is necessary to have the car and the key at a service dealer shop so that their machine can do the job. If the dealer you spoke to could not be bothered to help you then go to one who can . Go on line to Hyundai customer relations department and state your case very positively as they will not be happy with the dealer . After all it is not the dealer that suffers , it is the manufacturer's brand name that becomes dirt.

Jan 20, 2014 | 2007 Hyundai Entourage Limited Minivan

1 Answer

I have a Hundai Sonata, and my Key FOB don't work. Can I relace the battery, and if I can , how can I open the case.

the remote should have a little slot in the seam that you pry on with a small screw driver or a dime will work as well. once open you will see the battery, remove it an replace with one of the same type. the part number for the battery will be stamped on the battery. the batterys can be purchased just about anyplace.

Nov 06, 2013 | 2007 Hyundai Entourage Limited Minivan

2 Answers

How to program key fob for 2011 hyundai santa fe

Nonsense. I just programmed a new remote start fob on my 2011 Santa Fee limited and it worked just great. Follow the steps below and see what happens.
1. Open the drivers side door
2. Turn the Vehicle ignition to the ON position (Do not start the vehicle)
3. Locate the disarm/program button. (look closely, it is located on the wiring harness just inside the lower dash. it could be located just inside the fuse cover.)
4. Press and hold the disarm/programming button for 10 to 15 sewconds, the horm will beep 3 times. Release the disarm/programming button.
5. On the fob, press the Find/Panic button One time and the horn will beep one time.
6. Turn off vehicle ignition. (YOUR DONE)

Jun 08, 2012 | 2011 Hyundai Santa Fe

1 Answer

How do I program a new key fob for a 2007 Grand Prix? Bought a replacement on e-bay.

Hey Lisa,
You are going to have to take the car and the key fobs to the dealership .
They will need all of the fobs , as they are all going to need to be reprogramed at once ;
The fob on an 07 Pontiac only can be programed using a diagnostic scan tool .
They will connect the scan tool to the vehicle.
Turn key to on position.
Select 1 body,
then select special functions
then select program key fob,
select the number of key fobs you want programed.
Press and hold the lock and unlock key simultaneously for about 15 seconds until the power locks cycle to confirm the remote is programed.

Nov 05, 2011 | 2007 Pontiac Grand Prix GXP Sedan

1 Answer

I have a new VW Key Fob from Ebay. What is the most cost effective way, and known way to re-programme my new key fob for my VW Passat 2003? There is a lot of info out there, most outdated. Do I really...

Key added or replaced. System malfunction.
How -

Keys can only be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed.
How - 99MY

Switch ignition ON. Insert key to be programmed into driver's door lock. Lock vehicle manually. Press lock or unlock button. Wait at least 1 second. Press lock or unlock button again. Vehicle horn sounds to indicate correct programming. Keys can also be programmed using diagnostic equipment
Above is how to re-programme a replacement key/remote

Jul 19, 2011 | 2003 Volkswagen Passat

Not finding what you are looking for?
2007 Hyundai Entourage Limited Minivan Logo

Related Topics:

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides