Question about Cars & Trucks

Open Question

Heating and airconditioning air handler chirping

During the call for heat and during the start sequence...3 "chirps" are heard just prior to the main blower coming on, all works normal after that with no chirping.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 611 Answers

SOURCE: Air conditioner

sounds like ur blower motor resisters are faulty

Posted on Jun 13, 2008

Ad
fphandyworks
  • 56 Answers

SOURCE: Rear heat blows cold air

one of the second heater core lines is clogged.

Posted on Jan 05, 2009

  • 9 Answers

SOURCE: HEATER BLOWING BUT NO HEAT

Sounds like just a vacume line to me...

Posted on Jan 07, 2009

  • 74 Answers

SOURCE: audi a4 turbo chirps when car is started

Could be the belt(s).

If not that, could be a loose hose coming from the turbo. If it build boost and the hose is loose, it'll chirp. At least, it would on my turbo bike. Sounded like a balloon releasing air when the neck is pinched.

Posted on Feb 10, 2009

  • 1 Answer

SOURCE: Cobalt Blower Chirp

IT'S A CHEAP CAR!!!!!

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chirp doesn't list Abask radios. There are other similar appearing Chinese radios. Do you know which chirp-listed radios will work?


FAQ CHIRP
CHIRP is a FREE cross-platform, cross-radio programming tool. It works on Windows and Linux (and MacOSX with a little work). It supports a growing list of radios across several manufacturers and allows transferring of memory contents between them.

Jan 24, 2017 | Cars & Trucks

1 Answer

One tire not showing pressure replaced tire sensor still not


After TPMS sensor replacement or tire rotation, reprogramming is required. 1. key on engine off, parking brake on. 2. turn park lights on and off 4 times you will hear a horn chirp twice, you are in program mode. Start at L/F tire release air for 10 seconds, wait 15 seconds until horn chirp, after chirp go to R/F tire do the same until horn chirp then R/R let air out til the chirp then L/R do the same after the L/R chirp, turn key off and you are done, note you have only 5 min. to complete. If you do not hear horn chirp at each tire, you will have to start from beginning. When complete, remember to add air to each tire, 35 psi is recommended.

Jan 27, 2014 | 2005 Chevrolet Tahoe

1 Answer

2002 Hyundai Elantra - Multiple Symptoms


if you have serpentine belt and is chirping this means the belt is loose and probably cause of all the trouble, adjust tension of belt or check belt tensioner, or replace belt.

Dec 17, 2013 | Cars & Trucks

1 Answer

What does service tire monitor mean on a 2005 chevy tahoe means


It means you have a malfunction in the TPMS system. First you can try to do a reset as follows: 1. key on, engine off, parking brake on. 2. turn park lights on and off 4 times you will hear a horn chirp twice, you are in program mode. Start at L/F tire release air for 10 seconds, wait 15 seconds until horn chirp, after chirp go to R/F tire do the same until horn chirp then R/R let air out til the chirp then L/R do the same after the L/R chirp, turn key off and you are done, note you have only 5 min. to complete. If you do not hear horn chirp at each tire, you will have to start from beginning. When complete, remember to add air to each tire, 35 psi is recommended.
If that does not work you probably have a bad TPMS sensor, which will have to be replaced. Some auto parts stores will test your sensors for free, so check around.

Apr 01, 2013 | 2005 Chevrolet Tahoe

1 Answer

Tire pressure is correct but tps indicate a low pressure in one tire. service engine light comes on after a long drive and then goes off after a while.


Lets start with the tps light, make sure to check the tire pressure in the spare also as some car makers have a sensor on the spare also, after you sett all the tire pressures the light should go off after a small drive if not then i would reset the tps system,to reset the system you will first need to see if there is a sensor in the spare, the valve stem will be a regular rubber stem, this means no sensor or if it has the metal stem with the nut then it has a sensor but i will say it does not as i looked it up, the first step is to turn ignition on without starting the engine, so turn key until dah lights lite up this will be right before the start mode next push and hold the lock and unlock button on the remote, you will hear the horn chirp this means you are in program mode next you will start at the front left tire start to release air until the horn chrips after the horn chirps move to rt front tire and let air out until you hear the horn chirp you will continue to rt rear and let air out until horn chirp and last is left rear at the left rear the horn will double chirp this meand program is done turn key off. now set all tire to correct pressure and drive, light should go off, make sure to have all valve caps off as it gives you a total of 5 mins to complete the program but once key is off you have plenty of time, during the program mode if you are letting air out and the horn doesnt chirp then that tire has a bad sensor, you will need to let out at least 10lbs for the computer to pick up a change in the sensor, if the tire is flat from letting air out and the horn doesnt chirp then that sensor is bad, hope this helps, have a good day. note make sure you have an air pump or do this at an air pump as you will need to reset tire pressure .

Sep 21, 2011 | 2003 Cadillac Deville

2 Answers

Rotated tires now sensors do not read correctly


If you are talking about your low tire pressure sensors, theres a button in the glove compartment. Press it for 5 seconds to reset the sensors.

Feb 04, 2010 | 2005 Chevrolet Tahoe

1 Answer

Audi a4 turbo chirps when car is started


Could be the belt(s).

If not that, could be a loose hose coming from the turbo. If it build boost and the hose is loose, it'll chirp. At least, it would on my turbo bike. Sounded like a balloon releasing air when the neck is pinched.

Dec 24, 2008 | 2002 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...