Question about Cars & Trucks

Open Question

HVAC air handler chirping

During the call for heat and during the start sequence...3 "chirps" are heard just prior to the main blower coming on, all works normal after that with no chirping.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: audi a4 turbo chirps when car is started

Could be the belt(s).

If not that, could be a loose hose coming from the turbo. If it build boost and the hose is loose, it'll chirp. At least, it would on my turbo bike. Sounded like a balloon releasing air when the neck is pinched.

Posted on Feb 10, 2009

  • 1 Answer

SOURCE: Cobalt Blower Chirp

IT'S A CHEAP CAR!!!!!

Posted on Mar 19, 2009

  • 5 Answers

SOURCE: blower for AC/heat not working on Saab 9-3 ARC

that happened to me there is a i guess u can call it a fan cooler it keeps the fan from overheating and if that blows on a hot day it can mess up your blower moter but if its not workin at all you most likely allready did that for this job the blower moter is located behind the glove box if you not half dumb its a job u can do yourself and save a looooot of money on labor

Posted on Jul 10, 2009

dmsr63
  • 2050 Answers

SOURCE: 2003 SATURN ION CHIRPING ON BLOWER MOTOR

Sounds like something in the blower motor fan (also called the squirrel cage) Sometimes mice bring things into this for a nest.

Posted on Oct 17, 2009

ftw1952
  • 10319 Answers

SOURCE: It makes a chirping noise all the time

Chipping can be caused from a bad bearing that needs to be replaced or lubricated. It could be inside the alternator. power steering pump, idler pulley, Whater pump, AC compressor, and so on.
Use a long handle such as a broom stick and place the stick to each item that is belt driven. Place it at a secure place such as the housing so the stick does not get near the belt. As the engine is running place your ear at the other end of the stick. This works as a Stethoscope same as a doctor uses. The chirpping will be hear the loudest at one of the belt drive accessories during your testing

Posted on May 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One tire not showing pressure replaced tire sensor still not


After TPMS sensor replacement or tire rotation, reprogramming is required. 1. key on engine off, parking brake on. 2. turn park lights on and off 4 times you will hear a horn chirp twice, you are in program mode. Start at L/F tire release air for 10 seconds, wait 15 seconds until horn chirp, after chirp go to R/F tire do the same until horn chirp then R/R let air out til the chirp then L/R do the same after the L/R chirp, turn key off and you are done, note you have only 5 min. to complete. If you do not hear horn chirp at each tire, you will have to start from beginning. When complete, remember to add air to each tire, 35 psi is recommended.

Jan 27, 2014 | 2005 Chevrolet Tahoe

1 Answer

2002 Hyundai Elantra - Multiple Symptoms


if you have serpentine belt and is chirping this means the belt is loose and probably cause of all the trouble, adjust tension of belt or check belt tensioner, or replace belt.

Dec 17, 2013 | Cars & Trucks

1 Answer

What does service tire monitor mean on a 2005 chevy tahoe means


It means you have a malfunction in the TPMS system. First you can try to do a reset as follows: 1. key on, engine off, parking brake on. 2. turn park lights on and off 4 times you will hear a horn chirp twice, you are in program mode. Start at L/F tire release air for 10 seconds, wait 15 seconds until horn chirp, after chirp go to R/F tire do the same until horn chirp then R/R let air out til the chirp then L/R do the same after the L/R chirp, turn key off and you are done, note you have only 5 min. to complete. If you do not hear horn chirp at each tire, you will have to start from beginning. When complete, remember to add air to each tire, 35 psi is recommended.
If that does not work you probably have a bad TPMS sensor, which will have to be replaced. Some auto parts stores will test your sensors for free, so check around.

Apr 01, 2013 | 2005 Chevrolet Tahoe

1 Answer

Tire pressure is correct but tps indicate a low pressure in one tire. service engine light comes on after a long drive and then goes off after a while.


Lets start with the tps light, make sure to check the tire pressure in the spare also as some car makers have a sensor on the spare also, after you sett all the tire pressures the light should go off after a small drive if not then i would reset the tps system,to reset the system you will first need to see if there is a sensor in the spare, the valve stem will be a regular rubber stem, this means no sensor or if it has the metal stem with the nut then it has a sensor but i will say it does not as i looked it up, the first step is to turn ignition on without starting the engine, so turn key until dah lights lite up this will be right before the start mode next push and hold the lock and unlock button on the remote, you will hear the horn chirp this means you are in program mode next you will start at the front left tire start to release air until the horn chrips after the horn chirps move to rt front tire and let air out until you hear the horn chirp you will continue to rt rear and let air out until horn chirp and last is left rear at the left rear the horn will double chirp this meand program is done turn key off. now set all tire to correct pressure and drive, light should go off, make sure to have all valve caps off as it gives you a total of 5 mins to complete the program but once key is off you have plenty of time, during the program mode if you are letting air out and the horn doesnt chirp then that tire has a bad sensor, you will need to let out at least 10lbs for the computer to pick up a change in the sensor, if the tire is flat from letting air out and the horn doesnt chirp then that sensor is bad, hope this helps, have a good day. note make sure you have an air pump or do this at an air pump as you will need to reset tire pressure .

Sep 21, 2011 | 2003 Cadillac Deville

2 Answers

Service tire monitor light is on


is it just a dummy light on the dash or is it more specific like L.F tire low,ect? if its a dummy light then you need to go to a garage with a tire pressure monitor service to to check to see if the batteries in the monitors are still good or if you are just dealing with a leaking tire. If you Tahoe uses wheel speed sensors to monitor tires and pressure you may have a faulty wheel speed sensor or a heads up that your wheel bearing is wearing and the gap between the tone ring and sensor have increase or decreased good luck

Apr 07, 2010 | 2005 Chevrolet Tahoe

2 Answers

Rotated tires now sensors do not read correctly


If you are talking about your low tire pressure sensors, theres a button in the glove compartment. Press it for 5 seconds to reset the sensors.

Feb 04, 2010 | 2005 Chevrolet Tahoe

1 Answer

A/C chirping noise Camry 1998


If there is chirping noise then some object in the blower motor or the blower is making noise due the frictions b/w the walls of the blower motor unit ,you need to check the blower motor .....

Good luck...

Jan 19, 2009 | 1998 Toyota Camry

1 Answer

Audi a4 turbo chirps when car is started


Could be the belt(s).

If not that, could be a loose hose coming from the turbo. If it build boost and the hose is loose, it'll chirp. At least, it would on my turbo bike. Sounded like a balloon releasing air when the neck is pinched.

Dec 24, 2008 | 2002 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...