Question about 2004 Pontiac Grand Am
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the red plug on the bell housing is wear you put it in .but to check it is a pain in the ****.on the passenger side of the of the transmission.by the cv shaft is a 1/4" plug or it takes a 7/16 socket.whith the car running and not jacked up pull the plug.if fluid runs out it is full. if no fluid leaks out it is low.the car must be level when you check it . if it is low have a friend to poor it in while you watch it .when it starts coming out put the plug back in.do not shut it off with the plug out or it will leak the fluid out,what will they think of next
Posted on Jul 20, 2008
on some of the newer cars they dont have dipsticks they have a plug near the pan that you have to pull on the trans to check the fluid level and to fill it there is a cap hidden on top of the trans by all the stuff you have to try to bend a funnel around to get in it. dont you love the engineers
Posted on Nov 19, 2008
SOURCE: dipstick for transmission fluid
There is no transmission dip stick... it is a sealed system and no service is necessary. If it's leaking, you'll need to have the seal replaced.
Posted on Jun 08, 2009
I am not sure which engine you have on your 202 Grand Prix, but if you have the most common 3800 V6 this is where it should be. Look at the back of the engine compartment just to the left of the plastic master cylinder resevoir.
Here is a picture you can look at...
I hope I was able to assist you!
Posted on Jul 25, 2009
Hello! To check the fluid level, the first thing you want to do is get the fluid to operating temperature, by driving it for a bit and letting it shift through all gears. Once you've done that you need to make sure you park the car on a very level surface. Remove the front passenger wheel and the splash guard. From there reference the picture below to give you an idea where the fluid check plug is located - there is no dipstick on this transmission (4T45e). You will also see the fill plug location.
If you do a pan drop and filter replacement only, the fill capacity is 6.9 quarts. You will want to use Dexron III type transmission fluid.
FYI - here are the torque specs for the pan bolts is 106 in/lbs and the check/fill plugs are both 124 in/lbs.
Hope this helps and good luck!
Posted on Sep 25, 2009
Testimonial: "i already found the info, but the answer is 100% cinsistant with the info i researched. thank you!!!! "
Tips for a great answer:
Jan 10, 2013 | 2004 Pontiac Grand Prix
Sep 11, 2011 | 2004 Pontiac Grand Am
Jun 29, 2011 | Pontiac Grand Am Cars & Trucks
Jul 15, 2010 | 2002 Pontiac Grand Am
Aug 11, 2009 | 2004 Pontiac Grand Prix
Jul 04, 2009 | 1999 Pontiac Grand Am GT
Mar 07, 2009 | 2004 Pontiac Grand Am
Feb 18, 2009 | 2000 Pontiac Grand Am GT
Dec 01, 2008 | 2004 Pontiac Grand Am
207 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: