How do I repair a broken 4X4 shifter linkage on 2001 Dodge Ram 2500

SOURCE: 2005 Dodge RAm 2500....shifter linkage broke

there is a recall for that problem dealer fixes for free

SOURCE: 2001 dodge 2500 4x4 high oil consumption

These are know for having a leaking gasket on the bottom of the intake that will cause oil consumption. To test for this take the pcv valve out of the passenger side valve cover and the crankcase filter out of the driver side. With the engine running put your thumbs over the holes in both valve covers. It should build pressure. If you feel it pulling a vacuum, the gasket is leaking. You have to remove the intake and flip it over on a bench to change the pan gasket on the bottom.

SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?

Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

SOURCE: dodge 2500 ram diesel no tail lights and my abs

replaced the IPM (the fuse box) it was shorted

SOURCE: 2001 dodge ram 2500 v10 oil pressure drops to 0 then back up

you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.