Question about 2006 Dodge Ram 1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: dodge ram 1500 hemi
That motor has 16 plugs. You remove the coils and they are under there.It has 2 plugs per cylinder. Positive crankcase ventilation valve is what is referred to by pcv valve. It is usualy near or in the valve cover with a vacume hose to the intake.Some dodges screw it in to the intake and run a hose to the valve cover. If you can't find it let me know and I will look in the book. I hope this helps you. Thanks....Dan
Posted on Jul 07, 2008
SOURCE: changing spark plugs
look under hood..you will see wires coming from distributor cap on top into your motor..if its an 8 cylinder there will be 4 in the back and 4 in the front.6 cylinder-3 in front 3 in back.get a 5/16 spark plug wrench and socket.you will need extension to reach back ones.if you bought new wires from parts store it will be even easier to find where plugs are located because you can compare the ones you bought and easier find the wires under the hood.the wire gets fatter as it goes into the motor.grab the fat part firmly and pull it off.boom theres your spark plugs.use your spark plug socket(5/16) with extension/ratchet and turn the plug until it comes out.do not break the plug or it will not come out.when you put a new one in screw it hand tight then 1 crank tight with the ratchet.when you change your wires do them one at a time as to avoid switching the wires up.on top of the distributor cap(where the wires lead to) there will be numbers as to what wire is for what cylinder...change plugs/wires 1 at a time dont take off more than 1 wire at a time!hope this helped!
Posted on May 29, 2009
you are going to have to take it to a shop unless yo have the tools and the time to take the covers off that are on the engine then follow the wires from the distributor to the spark plugs and do them one at a time.
Posted on Jun 24, 2009
In my experience with the 2.7L engine, the spark plugs are located on the top of the engine below the individual ignition coils. The coils are placed between the intake manifold and the valve covers, 3 per side. The coils are held in with "torx" screws. Simply remove the screws, and disconnect the connectors to remove the coils. The spark plugs will be underneath. Be sure to properly gap the spark plugs for maximum life and emissions compliance. Also, an improperly gapped plug can shorten the life of the coil packs.
Hope this helps!
Posted on Jul 25, 2009
Tips for a great answer:
Mar 30, 2016 | 2004 Dodge Ram 1500
Nov 16, 2014 | 1996 Dodge Ram 1500 Club Cab
May 25, 2011 | 2006 Dodge Ram 1500
Nov 03, 2010 | 2006 Dodge Ram 1500
May 07, 2010 | 2005 Dodge Ram 1500
Apr 03, 2010 | 2006 Dodge Ram 1500
Mar 11, 2010 | 2005 Dodge Ram 1500
Dec 21, 2008 | 2006 Dodge Ram 1500
Dec 20, 2008 | 2006 Dodge Charger
223 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: