Question about 1992 Toyota Camry V6
A dry fill with filter - 5.5 L
A refill with filter change - 4.8 L
A refill without filter change - 4.5 L
Posted on Jan 11, 2013
Can't give you an exact number but I can tell you how to find out. I will asume that you are changing you oil and filter? After putting the oil plug and filter on put three quarts of oil in and start engine; after oil light goes off, turn engine off and let set for about 5 minutes, then check oil; if it is not on the low mark of dip stick add another quart, start engine, stop engine, let set for a couple of minutes and check again. By now you should either be at or above the low line and just add enough oil to top it off at the full line. I would guess that about 4 1/2 to 5 quarts is what you will need. Hope this helps,
Posted on Jan 10, 2013
Testimonial: "Thanks it helps a lot. Although I do have another question don't want to start a new topic,do you really need to change the filter if it's still good when doing an oil change? I have seen oil filters that say you can keep it for 16,000km and obviously you can't go without changing oil for that long."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the firing order is in fact 1 2 3 4 5 6 the number one cylynder is on the left at the back, as you look at the engine from the front >>
positions of cylinders
1 3 5
2 4 6
Posted on Mar 15, 2010
Under the engine in the front you will see an aluminum cover.There is a square hole that fits a 3/8 ratchet remove this first.The new filter comes with a drain adapter that snaps in the hole under the cover.This lets the oil in the housing drain.Then take a oil filter cup wrench or a big channel lock to twist of the larger portion.Then change the filter and o-ring and reinstall.Make sure the o-ring on the square drive cover is there also
Posted on Nov 30, 2008
yea i had the same problem, my last mechanic didnt tighten the top where d sprak plugs go in so it was leakin oil all they way down to the bottom where the exhaust runs and was smokin because of that... had it tightned and no longer ne smoke
Posted on Dec 04, 2008
Get a T belt from toyota. It has 3 white lines on
it and and arrow mark. 2 lines are solid and one is broken. Put the
arrow facing away from the engine. The cam gears have a dot punched
into them near a certain tooth. This is where the solid white lines
will line up with. The crank gear will have a dot also. It will line up
at 90 degrees from the top, towards the front of the car. This is where
the broken line will match up with. With the belt installed with all
lines on their proper dots and arrow away from the engine, you valve
timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.
Posted on Apr 16, 2009
Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1998 Toyota Camry. Plus additional Instructional and Directional Diagrams.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Mar 30, 2010
Tips for a great answer:
Jun 03, 2014 | 1998 Toyota Camry
May 21, 2012 | 1991 Toyota Camry
Mar 20, 2010 | 1992 Toyota Camry V6
Mar 10, 2010 | 1992 Mitsubishi Montero
Oct 07, 2009 | 1993 Toyota Camry V6
Oct 28, 2008 | 1992 Toyota Camry V6
Sep 29, 2008 | 1992 Toyota Camry V6
349 people viewed this question
Usually answered in minutes!