Question about 1992 Saturn SL2

3 Answers

1996 Saturn won't start- engine turns over

When I turn the key the engine putters for a second then stops. If you stand by the hood when turn the car on can smell the gas going. Someone told me to tell the mechanic that it is getting "no spark"

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

OK I don't know if this is your problem but my 92 sl2 is kinda the same way. my sl2s ECTS went out and it dose the same this is what it looks like1996 Saturn won't start- engine turns over - 4c01145.jpg you will have to remove the air duct to get to it and this is were it's located keep in mind there are two of them you want to unplug the one with two wires it is lower on the block. but do not remove it.
5f16ce9.jpg
after unpluging it try starting your car if it starts them you will have to get a new ECTS Coolant Temp Sensor. btw don't drive around with it unpluged just becouse it runs dosen't mean you should use it like that.

Posted on Jan 30, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey. i have a 96 saturn sl2 twin cam 1.9l. seems like the engine is flooding it turns over dosent start but i get the smell of gas like something is flooding i just put plugs water pump thermistat in it..it has to be fuel related im thinking

Posted on Oct 22, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saturn Master
  • 14,036 Answers

IF YOU DONT SEE NO SPARK AT PLUGS CHECK IGNITION FUSE IF FUSE OKAY. CODE SCAN FOR FAULTY IGNITION MODULE,FAULTY CKP SENSOR OF FAULTY PCM.

Posted on Oct 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Car will start but won't stay running


Is the Check Engine Light on/ If yes, go to AUtozne & get codes read and report them here.

Also, try cleaning the MAF sensor and throttle bdy with spray carb cleaner.

Check for 40 psi of fuel pump pressure. Can you hear pump hum for 5 seconds when key is turned to ON? Listen at tank at rea of car, pump is in the tank.

May 15, 2011 | 1996 Ford Taurus

1 Answer

I just put a new steering column in my 200 saturn sl2 because my ignition lock was messed up. Now when whe try to start the car, it will start up but immediately shut off and then the security light...


Hello: Will try to give you instructions: Attempt to start car, leave key on (security light flashing) let set for 10 minutes, After 10 minutes security light out. Turn key off for ten seconds, turn key on, let set for 10 minutes, turn key off for 10 seconds. turn key back on let set 10 minutes, turn key off for ten seconds, the engine should now start and stay running.

Jan 14, 2011 | Saturn SL2 Cars & Trucks

1 Answer

I have a 2001 saturn sw and replace the ign and the secuirty light flashs and eng will not crank.i dissconnected the battery over night and still the same. thanks steve


Hello: Try this procedure, Turn key on attempt to start engine leave key on, the security light should be blinking, wait 10 minutes. The security light should be off. Turn key off for 10 seconds, turn key back on (DO NOT ATTEMPT TO START) wait another 10 minutes. Turn key off for 10 seconds. Do the procedure again as in step 2. At the end of the third time turn key off then ten seconds later attempt to start the car. It should start.

Nov 25, 2010 | 2001 Saturn SL

3 Answers

How do i reset the oil light on a 03 saturn vue? i did the turn the key and press the gas peddle 3 times and that didn't work.


The procedure you used is for the 2006 > Vue, and will not work on your 2003. For the 2002-2005 Saturn Vue V4 or V6 - Under the hood you will see a black fuse box behind the battery. Open it up and you will see a red button, it is small and looks like a fuse but on the top it will say Oil-Res. Turn on the ignition & press and hold that button for about 10 seconds. You may want to have a friend sit in the driver's seat and watch for the indicator to start flashing, which indicates you've activated the reset. Turn off the ignition and that will reset the Oil light.

Nov 16, 2009 | 2003 Saturn VUE

1 Answer

1996 Cavalier--PLEASE HELP


Maybe try to replace the map sensor and the oxygen sensors

Jul 26, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1992 Saturn SL2 Logo

1,764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...