Question about Nissan Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Taurus does not use a heater control valve. It runs coolant thru the heater core constantly. You may have a temp blend door actuator problem or a plugged up heater core is also very common. Feel the heater hoses, they should both be very hot, it one is much cooler; you can try to back flush the core.
Posted on Mar 26, 2009
Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.
Posted on Jun 07, 2009
Your problem is a faulty heater control valve. The design used on these vehicles allows for hot water to flow constantly and compete with the evaporator as there is no blender door. You have to replace the valve and possibly the control head. Meanwhile, you can bypass the valve to have cold air
Posted on Sep 12, 2009
If your "Check Engine" or "Service Engine Soon" light is on, you need to have that checked out first.
If not, the next thing you should check is your engine coolant level. (Antifreeze) If the coolant level is low, the engine coolant does not circulate through the heater core and the the heater doesn't work. The coolant level could be low for a number of reasons including a leaky hose, water pump, or head gasket. In any case, if it is found to be low, you need to find out why.
If the coolant level is OK then the thermostat function needs to be checked to make sure that the engine is reaching operating temperature.
If all of the above checks out OK, then the heater control valve and/or the blend air door in the HVAC housing needs to be checked for proper operation. (NOTE: some cars are not equipped with a heater control valve)
Posted on Oct 10, 2009
the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel
Posted on Oct 28, 2009
Tips for a great answer:
Jun 11, 2016 | Nissan Cars & Trucks
Apr 01, 2016 | 2001 Nissan Almera Tino
Feb 22, 2016 | 2001 Nissan Almera Tino
Jun 02, 2015 | Cars & Trucks
Mar 04, 2015 | 2005 Nissan Almera 1.5
Mar 02, 2014 | 2001 Nissan Almera Tino
Oct 11, 2012 | 2001 Nissan Almera Tino
Oct 28, 2009 | 2003 Nissan Altima
Jun 03, 2009 | 2000 Nissan Maxima
253 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: