Question about 1998 Toyota Camry
Well there are two options., your valve cover grbomets for spark plug tubes are bad,specificly #1 or spark plug tube has to be remove and reseal, while doing this if not have acces to an special removal tool you need to remove valve cover, take this has an oportunity to replace valve cover gasket and all gromets(spark plug tube 4, and vlebe 8 small that look like a washers on each bolt) the tubes are treat in remove with locking plyers clean treaths on a wire wheel apply black silicone and reinstall.
Posted on Jan 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: no spark in 93 toyota camry 4cyl
First thing to do is to check the easy things.... Open the fuse cover and make sure that the fuse for the EFI system is ok...Check that the main EFI relay is secure and fitted correctly.
Once you've done that, then check the connections to the distributer are all secure...Next make sure the plugs have spark, by pulling out one of the plug leads and with a screw driver inserted into the business end and making sure you don't touch the metal part of the tool, hold it about five mm above the engine block....Make sure that the car is out of gear with the park brake on....Get someone to turn the starter and see if theres a spark.
If there's still no spark you can replace the distributer or you can replace the igniter, which you'll find inside the same unit....Let us know how you get on and we can give you more help if you need it...
Posted on Aug 31, 2008
Hi, take the oil filler cap of and start the engine,you should see oil spraying out the filler port ,that indicates that the pump is working properly, good luck.....
Posted on Nov 22, 2008
yea i had the same problem, my last mechanic didnt tighten the top where d sprak plugs go in so it was leakin oil all they way down to the bottom where the exhaust runs and was smokin because of that... had it tightned and no longer ne smoke
Posted on Dec 04, 2008
Keep an eye on the oil level get this repaired as soon as you can and remember that the oil of a car does two things not only does it lubricate but it also takes internal heat away from the parts that are being lubricated. Friction cause heat heat causes bearing fatigue so make sure you get this repaired as soon as possible and keep an eye on that level. Don't over fill that is just as bad as not having enough oil in it.
Posted on Dec 07, 2008
I am going to see a mechanic - my trusted mechanic who does not nickel and dime me - to see what this is. I have the same problem and he told me he has never done this job on a Camry and is unsure. Given the miles, he has suggested that maybe it is time to part ways with the car. I am going to ask him if he will put some florescent dye in it and let me drive it for 50-100 mi and then check to see where the leak is and fix it. Let you know what happens. I have to try, the car is solid.
Posted on Aug 15, 2009
Tips for a great answer:
Jul 05, 2011 | 1998 Toyota Camry
Jun 07, 2011 | 1996 Toyota Camry
May 16, 2011 | 2000 Toyota Camry
Sep 11, 2010 | 1992 Toyota Camry V6
Aug 17, 2010 | 1996 Toyota Camry
Dec 12, 2009 | 1996 Toyota Camry
Oct 22, 2009 | 1996 Toyota Camry
Jun 12, 2009 | 1988 Toyota Camry
May 28, 2009 | 1994 Toyota Camry
722 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: