Question about Cars & Trucks
Will not start when engine is warmed up????? tried reprogramming the ecu no fix tried changing plugs and no fix had it on diagnostics but it doesn't pin point anything out it starts first time when cold then you never no when its going to catch you out when it goes wrong it shows anti pollution fault please get back to me as im stuck thanks for looking
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: peugeot 406 1.9(110HDI) 2003
See if you can get the codes read, your model often has a particulate filter and all that entails but not allways on the 2,0 HDi, it seems too much of a coincidence to not be connected.
Posted on Jan 03, 2010
Testimonial: "I thought that the info was very helpful and prompt in response "
If it runs fine and the idle is the only problem you could try idling it up some with the idle set screw on the throttle body it sounds like it may be a little bit out of time those toyotas have a fine lins on the timing.
Posted on Jul 03, 2011
check electronic spark unit ie coil pack going open circuit when hot
will run but when turned off will stay open circuit untill cools down then closed circuit then will wprk fine
Posted on Aug 17, 2012
Anti pollution light, I never heard of a Check engine light being called that.
Read on please.
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Posted on Nov 04, 2012
Tips for a great answer:
Dec 28, 2016 | Citroen Cars & Trucks
Mar 25, 2016 | Citroen C4 Cars & Trucks
Mar 15, 2015 | 2007 Citroen C4 1.6i
Sep 25, 2013 | Citroen Cars & Trucks
Apr 13, 2013 | 2007 Citroen C4 1.4
Aug 17, 2012 | 2006 Citroen C4 1.6i
Oct 14, 2009 | 2005 Peugeot 405
230 people viewed this question
Usually answered in minutes!