Question about Isuzu Rodeo

Open Question

How to replace alternator belt on 1997 isuzu rodeo

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 548 Answers

SOURCE: 1997 Isuzu Rodeo Belt removal

You need to loosen the alternator so the belts become slack. Look for bolts on top and bottom that attach the alternator to a bracket or the engine block. Loosen them and the alternator will move. Since the belts hook to other accessories, you may need to loosen them too. To get them back and the proper tension, you'll need a large screwdriver or pry bar to put tension on them as you tighten the bolts. I suggest you get a Haynes guide for this model that will have photos showing how this is done.

Posted on Jan 11, 2009

Ad
pakis
  • 86 Answers

SOURCE: squealing belt

Causes of problem like yours can be:

  1. the alignment of the pulley of your alternator and the alignment of your engine's pulley. you may check it by just looking at it, be sure they are precisely parallel with each other.
  2. The size of the opening of your pulleys, you try to measure it using a caliper, they should have the same mouth size
  3. loose pulleys causing wiggle
  4. rusts on your pulleys
Hope I helped you

Posted on Nov 24, 2008

  • 13 Answers

SOURCE: 1997 Isuzu Rodeo

on the side of the block on the passenger side....u can see it through the wheel well

Posted on Feb 15, 2009

  • 1757 Answers

SOURCE: I need to find a diagram for a timing belt for a 1995 Isuzu Rodeo

We are talking about the Timing Belt and not the Drive/Surpentine Belt?

For the Timing Belt: CLICK on the following Link. It has all the Diagrams you will need for the Timing Belt.
http://www.2carpros.com/car_repair_information/year/1983/make/isuzu/model/pickup/1983_isuzu_pickup_timing_belt_diagram_marks.htm

For the Drive/Surpentine Belt: CLICK on the following Link. It has all the Diagrams you will need for the Drive/Surpentine Belt.
http://www.2carpros.com/car_repair_information/year/1995/make/isuzu/model/rodeo/1995_isuzu_rodeo_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a 1995 2.4 v6 isuzu rodeo alternator belt?


Just do a search on google. (1995 2.4 v-6 Isuzu alternator belt diagram) There are plenty of diagrams showing the belt routing. Put the belt on all the pulleys you can. Take a wrench and pull back the tensioner, slip the last part of the belt over the last pulley. Then, release the tensioner arm and it will tighten up the belt. Turn it over and check it again to be sure it is on straight.

Oct 13, 2014 | 1995 Isuzu Rodeo

2 Answers

I have a 1997 Isuzu Rodeo and the alternator belt broke. Replaced it, but now the fan is rattling like it is loose. Do I need to buy a new fan?


It is likely the fan clutch problem that caused the belt to fail, so in this case yes i would replace the fan clutch. Don't forget to check the water pump, it may also be the source of the noise.

Jun 17, 2012 | 1997 Isuzu Rodeo

1 Answer

I am having a problem with the voltage system in the Rodeo I just bought. We replace the Alternator and Battery with new ones yesterday and still today the same problem occurs and it will not run unless...


Isuzu Rodeo Recalls Rodeo ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR Recall - ID# 31705 Recall Date MAR 07, 1997 Part Affected ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR Model Affected RODEO Potential Units Affected 118485 Get Details Recall Date MAR 07, 1997

Model Affected 1994 ISUZU RODEO

Description AN INTEGRATED CIRCUIT WITHIN THE VOLTAGE REGULATOR CAN CONTAIN MANUFACTURING ERRORS.

Consequence THIS CAN CAUSE EXCESSIVE ELECTRICAL CHARGING OF THE VEHICLE'S ALTERNATOR, RESULTING IN ENGINE CONTROL MALFUNCTION, AND/OR EVENTUAL ENGINE STALL.

Remedy DEALERS WILL REPLACE THE VOLTAGE REGULATOR WITH A NEW REGULATOR.

Potential Units Affected 118485

Notes ISUZU MOTORS LIMITED

Dec 14, 2010 | 1994 Isuzu Rodeo

1 Answer

The 2 bolts on the alternator are not going in . How do i line up the screws on a 1998 alternator for isuzu rodeo


put the alternator on first without the belt and alighn as needed to replace the bolts use the belt tentioner to replace the belt or the sliding channel on the alternatonr mounts if there is no tentioner

i hope this helps u with your problem

Nov 12, 2010 | 1998 Isuzu Rodeo

2 Answers

Is the 1994 Isuzu Rodeo v6 compatible with the 1997 Isuzu Rodeo as far as engine parts...alternator, MAF sensor..etc?


go to the rockauto.com site and compare part numbers for each year and see if they are the same.

Sep 08, 2010 | 1997 Isuzu Rodeo

1 Answer

1997 Isuzu Rodeo 2wheel drive. Repalced


Get a Beck Arnley alternator. The auto-zone, Napa etc. alternators are a problem for Isuzu's. I worked at a dealership and a lot of them came in for this problem. If you still have the original have it rebuilt. Check yellow pages.

Apr 25, 2009 | 1997 Isuzu Rodeo

1 Answer

1997 Isuzu Rodeo Belt removal


You need to loosen the alternator so the belts become slack. Look for bolts on top and bottom that attach the alternator to a bracket or the engine block. Loosen them and the alternator will move. Since the belts hook to other accessories, you may need to loosen them too. To get them back and the proper tension, you'll need a large screwdriver or pry bar to put tension on them as you tighten the bolts. I suggest you get a Haynes guide for this model that will have photos showing how this is done.

Jan 11, 2009 | 2002 Isuzu Rodeo

1 Answer

97 isuzu rodeo


look carefully as power steering belt has to be removed and A/C if fitted,slacken bolts on power steering pump then find the tensioner bolt and slacken it off and then push pump unit back..Same sort of thing with the A/C pump but i think but cant remember but i sure this one has an idler/tensioner to slacken.

Jan 10, 2009 | 1997 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...