Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Adjusting the low beam headlight
its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much
Posted on Jan 31, 2009
YES!... with various system operating difference. Disconnecting the alarm does not disable it.. it only silences the alarm. You will still need the Keyless Entry System Remote to RESET the alarm to start the vehicle.
Posted on Jun 30, 2009
P0139 HO2S Circuit Slow Response (Bank 1 / Sensor 2). This is the downstream sensor (after the catalytic converter). Odds are the sensor is going bad. Check connections/ connector to this sensor. If you don't find any problem/trouble with this connector, replace the O2 sensor.
Posted on Jul 18, 2009
P1166 O2 Sensor - controller adaption diagnosis malfunction (bank 1).
* P1166 is case for HO2S (Bank 1, Sensor 1) Signal line open
* Fuel system (Fuel tank/Pressure regulator/Fuel pump/PSV) failure
* Poor connection to fuel line hose/sealing/cut
* Sealing between purge valve and fuel tank
* Air leakage in exhaust system
* Ignition system (ignition coil, spark plug, cable) failure
* Surge tank and intake port failure
Posted on Oct 16, 2009
P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)
I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.
Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.
Hope this help (remember rated this post).
Posted on Mar 25, 2010
Tips for a great answer:
Oct 10, 2016 | Hyundai Motor 2003 Elantra
Dec 29, 2015 | Hyundai Motor 2003 Elantra
Jan 30, 2015 | Hyundai Motor 2003 Elantra
Mar 06, 2012 | Hyundai Motor 2003 Elantra
Jun 07, 2011 | Hyundai Motor 2003 Elantra
Feb 10, 2010 | Hyundai Motor 2003 Elantra
Sep 30, 2009 | 2002 Hyundai Santa Fe
Sep 07, 2009 | Hyundai Motor 2003 Elantra
Jun 30, 2009 | Hyundai Motor 2003 Elantra
Aug 01, 2008 | Hyundai Motor 2003 Elantra
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: