Question about GMC Suburban
Plug leadsss yo distribuyor.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i went under for driver side then i took off passenger side wheel you also have to remove two bolts that are holding dipstick tube in place it is easy to get them from the wheel well on passenger
Posted on Nov 17, 2008
SOURCE: firing order for a 1986 gmc s15
To avoid confusion, ALWAYS replace spark plug wires one at a time.
The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.
Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise
Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise
Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 05, 2009
For the 1988 GMC Jimmy 2.8L V6:
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Apr 26, 2010
Tips for a great answer:
Aug 06, 2015 | 2000 GMC Safari
Firing order for 1992 chevy astro 4.3L, From front of engine driver's (left) side No.1, to right front, No.2. left side middle cyl. No.3. Right side mid. cyl. No.4. Rear cyl. left side, No.5. Rear rihgt No.6. On the Distributer cap from No.1 (should be marked) plug tower order is 1,6,5,4,3,2.
Read more: http://wiki.answers.com/Q/What_is_the_firing_order_for_a_1995_Chevy_Astro_4.3L#ixzz1OeLSDOuP
Jun 08, 2011 | GMC Safari Cars & Trucks
Oct 12, 2010 | 1999 GMC Safari
Feb 19, 2010 | 1999 GMC Safari
Nov 17, 2009 | 1993 GMC Safari
Nov 13, 2009 | 1994 GMC Safari
Jun 20, 2009 | 1989 GMC Safari
Jun 09, 2009 | 1991 GMC Safari
Jul 11, 2008 | 2002 GMC Safari
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: