Question about 2000 Ford Focus

1 Answer

Ford focus abs light dose not light up at all . ( 99-1.6.petrol)

When i turn the ignition to 2nd stage the abs light on the instrument panel dose not light at all,although the brakes are working without the abs function,could you tell me what the problem is and how to fix it thank you
gerard

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Read your owner manual to see when the BAS light should be on during "prove out." Sometimes the prove out is after the engine starts.
Also, if the ABS ever fails, you always still have regular power brakes.

You should go on a gravel road and slam on the brakes to se if the anti'lock still functions. You will hear the BAS motor run and the pedal pulse. good luck

Posted on Jan 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is my ign fuse located on my car


Below dash instrument panel, R16 ignition relay
98 Ford Contour SE Fuse Box Map
Fuse Panel Layout Diagram Parts: passenger side air bag, heater blower, interior lighting, heater blower motor, parking lamp, interior lighting, electric mirror, clock, wiper motor, ignition, reverse voltage protection, rear window defrost, engine management system, instrument panel illumination, radio, wiper motor, power windows, ABS module, backup lamp, brake lamp, door lock, main light, cigar lighter, electric seats,
link below should be the same as yours, press the helpful button

http://www.autofuseboxdiagram.com/1342-98-ford-contour-se-fuse-box-diagram

Jan 30, 2016 | 1999 Ford Contour

1 Answer

Where is my ign fuse located on car


Below dash instrument panel, R16 ignition relay
98 Ford Contour SE Fuse Box Map
Fuse Panel Layout Diagram Parts: passenger side air bag, heater blower, interior lighting, heater blower motor, parking lamp, interior lighting, electric mirror, clock, wiper motor, ignition, reverse voltage protection, rear window defrost, engine management system, instrument panel illumination, radio, wiper motor, power windows, ABS module, backup lamp, brake lamp, door lock, main light, cigar lighter, electric seats,
link below should be the same as yours, press the helpful button

http://www.autofuseboxdiagram.com/1342-98-ford-contour-se-fuse-box-diagram

Jan 30, 2016 | Cars & Trucks

1 Answer

Fuses panel described in English


Hope this helps your out. I know the diagram and locator is a bit blurry but hopefully it gets what you need.
Drivers kick panel:
Front wiper 20A - Front wiper system Cigar 15A- Cigarette lighter Audio 10A- Audio, remote control mirror Air Bag 10A -Air bag diagnostics Stop lights- 15A -Rear brake light, high mounted stop light ECU B+ 10A - Shift lock actuator, transaxle controle module, radio, engine control module Room 10A - Interior light, clock, ignition key reminder, rear cargo area light switch ABS 10A- Anti lock brake system control unit ECU IG1 10A - Transaxle control module, shift lock actuator, ABS control unit, DRL unit Meter 10A - Instrument panel, back-up switch, electronics time control module, inhibit switch Turn signal 10A- Hazard switch ,front and rear turn lights, turn indicator IGN1 20A - Ignition switch ABS 30A- ABS pump motor TNS 30A- Tail light, license plate light COOL/FAN 30A- Cooling fan Cond/Fan 20A- A/C condenser fan Starter 15A- Start signal , Fuel pump Blower 25A- Blower Motor SR/ACC 10A - Ignition switch Hazard 15A - Hazard and turn signal light D/Lock 25A- Door locks ABS 30A - Anti lock brake system control P/W RH 20A- Power window motor right hand P/W LH 20A- Power window motor left hand IGN2 25A- Ignition Switch
Engine compartment :
Head 25A- headlights IG 2 30A- Ignition switch IG coil 15A -Ignition coil, condenser,generator IC regulator, diagnostic connector. O2 down 10A- Rear O2 sensor O2 up 10A- Front O2 sensor Fuel pump 10A -Fuel pump unit Injector 10A -Fuel injector ,camshaft positioning sensor, purge solenoid valve, EVAP, IAC actuator, Mass Airflow sensor, EGR stepper motor. fuel pump relay coil, vehicle speed sensor. A/Con 10A - A/C compressor controls, cooling fan BTN 30A- Brake light , high mounted stop light. Tail light LH 10A- License plate light, tail light , rear combo light, instrument panel illumination Tail light RH 10A-License plate light, tail light , rear combo light, instrument panel illumination Head low 15A- Headlight Head Hi 15A-Headlight Horn 15A- Horn jlmacman.png jlmacman_0.png

Inside kick panel jlmacman_1.png

Mar 07, 2011 | 1995 Kia Sephia

1 Answer

I have a 2001 Ford Focus with 2.0 litre engine, 16 valve Zetec engine. The fuel tank gauge was working fine until I put gas in and the tank gauge shows empty and the fuel tank light is on. ( instrument...


could be stuck or the sender unit has failed and most likely cause is the float has filled with petrol but without a removal of the sender unit and an inspection its only speculation

Feb 21, 2011 | 2001 Ford Focus

1 Answer

Resetting ford c max 1.6 petrol engine management light


hi, i have a 04 i.6 petrol c max , and has a slight flat spot in 2nd 3 and so on at low revs , is this normal, only got car today.

Sep 03, 2010 | 2004 Ford Focus

1 Answer

ABS light doesn't light up when key is first turned


normally, all the lights come on when the key is first turned on as a bulb check. you should have it fixed so you will know when there is a problem with the ABS system

Nov 24, 2009 | 2000 Ford Focus

1 Answer

Abs light keeps flashing on/off - 2003 ford focus


have a mechanic check out the 1of 3 things.1st- abs rings. 2nd- the the speed sensor or so called abs sensor's.These read off of the abs ring to make the abs brakes work! If not any of those i would say abs module.module isa little expensive though so if it is look for it on ebay or rock auto..hope i could help you?

Sep 22, 2009 | 2004 Ford Focus

2 Answers

How do you reset ABS light\system after replacing


take the positive cable off the battery for 10 minutes. then replace it to reset it. if this does not work then take it to ford they have a reset machine.

Jul 27, 2009 | 2000 Ford Focus

1 Answer

2004 focus brake & ABS light on


Ok the reason I ask is that will help to pinpoint the concern. See ABS system when you first turn the ignition on will do a self test on itself,light turns on for a few seconds then turns off if everything proves out. Then when you start driving once you reach about 12 mph it will activate the pump and perform a 2nd self test.If everything is ok light stays off,if it see's a problem it turns on the light and disables the ABS.
Since yours comes on after you start driving then problem is most likely a wheel speed sensor concern. Since you just did a rear brake job and the problem started after this I would say it is one of the rear sensors.You need to look at the sensors and make sure the sensor and ring look ok and that you didn't get grease or dirt in the teeth of the sensor ring or maybe bent the end of one of the sensors and make the gap larger between sensor and ring.

Feb 20, 2009 | 2004 Ford Focus

1 Answer

Ford focus-99 abs module


if the ABS system is functional u will have no ABS warning light showing in the dash except when u first turn the key on, that is a prove out to show the indicator light is working. If the ABS has a problem of any kind the light will always stay on when driving and the system will be disabled..

Jan 22, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...