Question about 1999 Dodge Intrepid

Open Question

How to remove idler pulley on a VT commodore - 1999 Dodge Intrepid

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Car stays in first gear when driving it's a vt commodore

automatic ?
GM 4L60E transmission.

low oil
faulty shift solenoid

if transmissions shot
approx $350-400 gets a better one from a wrecker

repair manual for the auto is online
and some youtubes made on theses automatics

join this free forum
best VT commodore owners think tank in australia

Mar 07, 2017 | Cars & Trucks

1 Answer

How to remove gear stick in a 98 vt commodore

I would try the VT section of the Just Commodores Forum and one of the guys there should help you with that. Be sure to identify if the car is a manual or auto transmission.
Here is the link to the Forum.....................


Apr 24, 2016 | Cars & Trucks

1 Answer

Step by step method on how to put fan belt back on commodore 98

Hi Sharon, The link below is a diagram of pictures for 1998 VT commodore fan belt.........CHEERS MATE..

how to put fan belt back on commodore 98 Google Search

Apr 15, 2016 | 1998 Holden VT Commodore

1 Answer

Remove power steering pump on commodore vt

Im assuming you are asking about how to remove p/s pump on a v6 commodore. a drain try under vehicle to collect p/s fluid.
2.on the p/s pump pulley you will see 4*10mm bolts release them.
3.remove drive belt remove p/s pump pulley.
5.undo p/s return line
6.release and undo abt half way 2*13mm bolts that mount p/s pump to engine block.
7.on the rear of the pump you will see the metal feed pipe use a pipe spanner to undo it 16mm
8.finish undo the 13mm bolts hold pump on ,once these bolts are off the pump will come away..

Apr 17, 2014 | 1998 Holden VT Commodore

1 Answer

When I've being driving for awhile my vt commodore just stalls with no warning and may take half an hour or more before it will restart need help

change your crank sensor
a way to confirm if this is at fault when it stops pour cold water over left side of crank pulley where sensor is and try and restart if it restarts its the sensor

Mar 07, 2014 | 1998 Holden VT Commodore

1 Answer

Vt shifter button

this is not an uncommon problem.
you will need to go to your local holden dealer and purchase a new gear shift button.
To fit the new gear shift button you will need to remove the centre console insert and the screw that holds the t-bar trim in position..

Jul 03, 2013 | 1998 Holden VT Commodore

1 Answer

Remove ignition barrel in vt commodore

you need to have the key in the ignition take the shrouds off there is a small hole underneath the barrell you have to push something small into the hole then pull out the barrell

Apr 09, 2013 | 1998 Holden VT Commodore

2 Answers

I have a 2001 VX Commodore Sedan and i have a real loud squeaky noise at the front of the motor which sound like it is coming from the belt for either the aircondition or the radiator??? I have taken

Hi Utiila, The problem you describe is most likely from a belt and it is not uncommon. The belt may be loose or need replacement. Regards John

Oct 14, 2012 | 1998 Holden VT Commodore

1 Answer

Replace serpentine belt on commodore v6

opel engine ,one of the idler pulleys is the adjuster which you turn with a spanner on the nut possibly left ways ,draw a pic before you remove the old one

Sep 22, 2012 | Cars & Trucks

Not finding what you are looking for?
1999 Dodge Intrepid Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides