Question about 2003 Hyundai Elantra GLS

1 Answer

Copper brake pipe size

Brake pipes need replaced - need to know what size of brake piping to buy

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Go into any reptuible car spares place with car detailes they will be made for you within an hour dont use main dealers you will pay way too much.

Posted on Jan 10, 2013

  • garywilson86
    garywilson86 Jan 10, 2013

    Never thought of that - was going to buy 25ft of Kunifer or copper piping and make my own.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I was told that the brake junction box is rusted really bad on the 02 zx2 i bought. what is that and where is it located on the car? Is it a replacable part and where can i buy it?


Under the car, a block that has the pipes to all four wheels brakes. Replacement is possible, but sometimes you have to change all the pipes as well if they are steel.

Feb 12, 2017 | Cars & Trucks

1 Answer

What is THE EASIEST WAY TO BYPASS MY HEATER CORE ON MY 2000 BMW 323I


the easiest way is to remove the pipes to it from engine bay and use a copper pipe to bridge the pipes, so you will need to cut the ends off and use some jubiees on the pipes to secure it to the copper pipe standard house hold size copper pipe, if you do need to cut ends off make sure you leave and inch and a half on them so you can fix them back on when the heater core is replaced or fixed. just to recommend i would fix the core as soon as possible

Jan 05, 2017 | BMW Cars & Trucks

1 Answer

Diahatsu delta brake manual


to replace corroded fluid lines

two options
find a diahatsu truck wrecker or junk yard
scavenge all the hard lines you need off.. the same model truck

have the hard lines made up from new pipe and connections
brake shop can do all the brake pipes ..even fuel pipes

anything odd a mobile hydraulic hose repair service




26315762-ghn23szibhldwlhhoo5lk5op-5-0.jpg

Oct 18, 2016 | Cars & Trucks

1 Answer

How do you chnage the brake pipes in a 406?


Brake pipes? Do you mean pads? or are you talking about the hard brake lines that run from the master cylinder to each wheel?
As far as I know there is no such thing as a "brake pipe".

Mar 01, 2010 | 2005 Peugeot 405

1 Answer

Leaking fuel line under engine


remove fuel filler cap. if its rubber pipe clamp the pipe on both sides of the hole, cut out the bad bit and force 1 peace of copper brake/fuel pipe about 2inch long into either end of the rubber pipe so they are vertually touching clamp with jubiley clips this will hold for years to come!

Jan 30, 2010 | 2000 Ford F350 Super Duty Super Cab

4 Answers

The rear brake line broke. the repair man says I need to replace all the lines and the fuel line because everything is rusted and there may be a problem when he bleeds the line causing a problem with the...


I doubt it is so bad. You see, there is a rear brake line >> there is a border, say the hoses which allow the rear suspension to move w/o breaking the lines. In my opinion all the brake pipes shouldn't cost more than 100-150EUR. In the official service, of course, you can multiply, at least here in Bulgaria. My own car, VW Jetta 84 survived the change before ~ 2 months, I was replacing the original pipes judging by the outlook. Of course, your car may differ, and you have to be careful with the brakes! Lawers: I am not responsible for anything, just trying to help!
Anyway, in my case:
- WD-40 spray
- six-sided quality wrench of appropriate size, with a small cutting, so you can pass the key over the pipe and on the nut. There are also keys with a bolt on the cutting, so you can tight the wrench on the nut.
- spare set of the tubes and hoses you will replace. I got brass ones (no more rust) for very adequate prize, under 15EUR, they were ready with the nut at both ends. Replaced even both rear brake cylinders, 5EUR for piece, but don't know your part's price.
As for bleeding, it was working, right? Either do not touch it, or detach both sides and bleed at will, while the pipes are open nothing will reach the cylinder.
After all pipes are in place, put new liquid, blow the air out of the system (it is easy, ask if in needed), and check the nuts of the new pipes. If there is a leakage, tighten gently some more until it stops.
You can fasten the new pipes with strong pigtails, putting a oneside-cut part of hose on the pipe, so that the pigtail won't press it on metal. This was my idea, but turned quite well.
As for the fuel pipe, it is even easier.
Hope I have helped, pls rate. :)

Nov 07, 2009 | 1997 Chevrolet Lumina

2 Answers

Need to replace brake line going to drivers side


You can take the line off and take to a parts store that sells metal brake pipes by the foot,there is different size pipes as well as flared end nuts.You will have to bend the pipe to fit then bleed the brake system.Iwould suggest to take it to a shop and have a pipe made up.

Aug 22, 2009 | 1996 Buick Skylark

1 Answer

Brake pipe problem.


The local auto parts stores carry splice kits that you can use instead of replacing the entire brake line. Just cut the bad piece out and take it with you for size comparison and they can get you the correct splice kit.

Apr 06, 2009 | 2002 Ford SVT Focus

1 Answer

Brake pipe male unions


take the old ones off and have them matched at the parts store

Aug 29, 2008 | 1997 Ford Escort

Not finding what you are looking for?
2003 Hyundai Elantra GLS Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...