Question about Toyota Tacoma

Open Question

Code p0031, p0136 toyota tacoma

Code p0031, p0136

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Stalling Toyota Camry 2004

P-0102 and P-0113 are mass air flow and intake air temp codes, the P-0136 is an Oxygen sensor code. Before you do anything, check for debris in the Mass Air Flow Sensor, it's small black box with electrical wiring connector that is screwed into the intake air tube, between the air box and the intake manifold. Undo the screws, remove the sensor, and, with a flashlight, and look down inside it for debeis, or broken wires inside it. If it's dirty, it could throw a P-0136...Comment back on what you find; hope this helps, and thanks for choosing FixYa!

Posted on Oct 24, 2008

Ad
  • 145 Answers

SOURCE: intermittant P0136

OK Thad code PO136 is your oxygen sensor the one before the catalytic converter and yes if your you bought your car brand new
from the dealer ship yes you are covered by the factory warranty
but if you got it from a used car dealer then you are not.

If you are not covered the good news is than that is not so hard to change.
all you need is a jack a oxygen sensor tool ( you can get it as a loaner on Auto Zone no charge ) and a new oxygen sensor.

If you don't know how a catalytic converter looks like click this link
good luck.
http://cgi.ebay.com/ebaymotors/2002-TOYOTA-TACOMA-MAGNAFLOW-CATALYTIC-CONVERTER-23759_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem3a4ae004b7QQitemZ250364298423QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ebayphotohosting

Posted on Jun 22, 2009

  • 1986 Answers

SOURCE: P0136 code on 1998 Toyota Corolla?

The sensor will cost around $100 give or take a bit. The labour will be around $50 give or take a bit (30 min job according to estimate book)

you can also buy the sensor and change it yourself. It's the O2 sensor located after the catalytic converter

Posted on Sep 18, 2009

  • 170 Answers

SOURCE: I own a 2002 4.0

Follow this link http://www.wjjeeps.com/faultcodes.htm Good Luck!

Posted on Sep 03, 2010

  • 194 Answers

SOURCE: 2003 Jeep Grand Cherokee, 6-cyl.

Have the codes cleared from the computers memory.Good Luck and have a good XMASS.From Ernie At RedDeer, Alberta Canada.

Posted on Dec 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code P0031 says replace B1 S1


On a front to back engine b1 is the drivers bank. On a transverse engine b1 is the front bank ( b1 has cylinder 1, b2 has cylinder 2 in a v type configuration) s1 is always between the engine and the catalytic converter. Usually in the exhaust manifold or the down pipe.

Sep 10, 2016 | 2011 Toyota Tacoma

1 Answer

How to fix a 2002 dodge durango with p0051,p0136,p0031 codes


All 3 of these Codes have to do with the O2 devices. Some are saying the heating elements are returning low signals. These elements are built inside the O2 sensors and are designed to make your vehicle get out of "rich" mode faster.

Bank2 sensor1, Bank1 sensor1, Bank1 sensor2. Check your connections and the wiring leading to these parts.

You may need to replace these O2 sensors if the wires are good.

Sep 15, 2012 | 2002 Dodge Durango

1 Answer

Just replaced all 4 o2 sensors and it is still giving me these codes... p0031 p0202 p0051 p0302 p0136


Check the air flow metre on the air box and all connections on the O2 sensors

Jul 30, 2011 | 2004 Jeep Grand Cherokee

3 Answers

Troble code P0170


Trouble Code: P0170 (3.4L V6 VIN V Auto)
Fuel System Too Rich or Too Lean (Bank 1) Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
DTC P0100, P0101, P0110, P0115, P0120, P0121, P0130, P0133, P0136, P0135, P0136, P0141, P0153, P0155, P0201-206, P0300, P0301-P0306, P0401, P0402 and P0441 not set, engine running in closed loop at a stable engine speed, and the PCM detected the lean or rich fuel trim correction value was more than or less than a calibrated limit in memory.

Possible Causes:
  • Air leaks present in the exhaust manifold or exhaust pipes
  • Air being drawn in from leaks in engine gaskets or other seals
  • Base engine "mechanical" fault affecting one or more cylinders
  • Fuel control sensor is out of calibration (i.e., ECT, IAT or MAF)
  • Fuel delivery system supplying too much or too little fuel at idle or cruise (e.g., faulty fuel pump or dirty, restricted fuel filter)
  • One or more fuel injectors is dirty, leaking or stuck open/closed
  • HO2S element is contaminated, damaged or it has failed

Oct 11, 2009 | 1995 Toyota Tacoma

1 Answer

Intermittant P0136


OK Thad code PO136 is your oxygen sensor the one before the catalytic converter and yes if your you bought your car brand new
from the dealer ship yes you are covered by the factory warranty
but if you got it from a used car dealer then you are not.

If you are not covered the good news is than that is not so hard to change.
all you need is a jack a oxygen sensor tool ( you can get it as a loaner on Auto Zone no charge ) and a new oxygen sensor.

If you don't know how a catalytic converter looks like click this link
good luck.
http://cgi.ebay.com/ebaymotors/2002-TOYOTA-TACOMA-MAGNAFLOW-CATALYTIC-CONVERTER-23759_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem3a4ae004b7QQitemZ250364298423QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ebayphotohosting

Jun 22, 2009 | 2003 Toyota Camry

2 Answers

GIVE ME A DIANOSTIC CODE PO136


Hi. Here's the description of this code i pulled up out the archives. P0136 - Heated Oxygen Sensor (HO2S) Circuit Bank 1 Sensor 2. i suspect the wires are worn or beginning to separate from the sensor housing.


please rate and god bless.

Mar 18, 2009 | 2001 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...