Question about 2006 GMC Envoy Xl

2 Answers

What part - you said

Replace the front differencial part (a round part underneath in the middle)

Posted by on

  • 1 more comment 
  • evelyn_diaz Jan 21, 2009

    yes

  • evelyn_diaz Jan 21, 2009

    yes that it is

    should that be replace even if the noise went away

    how would I know is damage?

  • Roberta Smith
    Roberta Smith May 11, 2010

    What ?

    do you mean a cv joint .... cv meaning constant velocity



    Robert

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Ok fair enough... what do you need to know ?

Robert

Posted on Jan 21, 2009

  • Roberta Smith
    Roberta Smith Jan 21, 2009

    find a parking lot with no cars in it... turn the wheel all the way to the right and drive slowly... do you hear a ticking noise ?

    repeat that but turning to the left... listen again for a ticking noise... if you hear one it's likely a failing cv joint



    Robert



    Please rate this solution... thanks

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Look Underneath at the Front Axle. Right in the Middle is a Big Round Section. Inside this are Gears. I assume that that is what You Mean????

Posted on Jan 21, 2009

  • Travis Humphries
    Travis Humphries Jan 21, 2009

    If the Noise went away and it is Running ok and Driving ok Then you are Probably ok.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LSpecifications on how to rebuild/repair landcruiser rear differencial


you must first afereseis the brake system after the two axes moves right and left (for releases the differencial). Take out the screws perimeter from the differencial and take off .
began to assemble in reverse.

Sep 28, 2014 | 1971 Toyota Landcruiser

1 Answer

How to replace crank sensor


My crankshaft position sensor is located underneath my car, towards the middle of the two front seats. That's if you are talking about the same sensor. Good luck and take care. :-)

Apr 05, 2014 | 2005 Dodge Neon

1 Answer

Front differential


Here's a link,click on blue view info. icon to see diagram.

Dec 17, 2013 | 2001 Chevrolet S-10

1 Answer

Have a 97 camary replaced water pump and timing and thermostat car is still running heat. the over flow jug is still full, but the water is leaking underneath on the passenger side front tire and in the...


the water leak could be the AC ?? if its on ,if still overheating then ask a local mechanic to advise ast it couild be a multitude of different things causing the engine to run hot ,like a build up of corrosion in the cooling system clogging the rad up .All vehicles must have antifreeze in all year round

Jun 27, 2011 | 1997 Toyota Camry

1 Answer

My diferencial is making a sound


Once the differencial is making a sounds it mean that a major damage has been done to it. You can change the differencial fluid and visually inspect the gears to look for big broken metal pieces. If so you will have to replace it. Sonner then later the tires are gonna get locked and you're not gonna be able to move the trow without towing it.
Please don't forget to rate me. This will help me thanks

Mar 04, 2011 | 1998 Dodge Durango

1 Answer

What type of fluid is used in my diesel 2001 F350 front and rear differencial?


Front differential is: 75W-90

Rear Differential is a little different...what type of differential...limited slip or standard differential? Dana 135?


Axles subject to frequent trailer towing in hot or
hilly conditions may use Synthetic 75W-140 GL-5

Jun 10, 2010 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Pulsating grinding noise from front differencial


It sounds like to me front wheel bearing hub assembly.

Nov 29, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...