Question about 2007 Toyota RAV4

Open Question

How to replace a molding on rav4 2007 window

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rear window hinge replacement

those moulding are just held by plastic clips you have to yank it out. in proper order in relation to the other mouldings of course

Aug 11, 2013 | 2005 Hyundai Tucson

1 Answer

Need door window moldings for all doors on 98 century.. Current moldings are cracked due to excessive sun exposure

Of course the dealer can probably supply the mouldings. Most large cities have companies that supply body shops with aftermarket parts which include things like trim.
You can check with a local body shop or the phone book for suppliers, as well as online.

Jul 18, 2012 | 1998 Buick Century

1 Answer

Window trim molding on all four door window rusting out; can I buy these moldings after marketz/

The trim molding is available at most auto parts stores. I'd suggest not buying from the dealer unless $ is no object. Also, you can get it in plastic so you won't need to worry about it rusting out again.

Sep 06, 2010 | 2004 Jeep Grand Cherokee

1 Answer

My Chrysler Town and Country back wiper has been replaced but now the wiper moves but doesn't fully mold to the window.


Jul 03, 2010 | Cars & Trucks

1 Answer

How do the rear quarter panel windows come off a 91 mustang GT

You have to pull the inside trim off to get access to the nuts that hold the 1/4 glass in place.

I better way of attacking your problem is to tape off the molding and paint it still attached to the car. I have done this several times with very good results.

Feb 26, 2010 | 1991 Ford Mustang

1 Answer

I have a rattling sound in the dash passenger side that I only hear at around 60 and up MPH. Seams to be from some type of windnoise but I havent found anything loose in the dash.Has anyone else ever...

The side windshield moldings are your problem. Gm has an updated version but i wouldn't spend the money on them.

There are 5 screws holding the molding on. Remove the molding, clean both the window and the molding with a good glass cleaner. Put a strip of 1/2 inch double sided tape on the windshield edges then install the molding. This should take care of your problem.

Nov 11, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

I need to know how to put rear left window on 2005 Grand Cherokee Limited back on track

got pull the door molding off to get the insides it a pain the ***. Make shure you get the metal ore plastic track that broke of. go dealer what ever the window set in broke ore rusted you need new one. Get year make model part guy pull up the picture put pull the door side molding off inside first see what you need replace.
I have done this on my honda civic get ready cut your hands up little stick them little spaces

Jul 12, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Remove the lower window molding on2000 durango

For the lower belt molding?

1.lower glass
2.Lift corner of weatherstrip upward and remove weatherstrip from outer door panel.

Apr 27, 2009 | 2000 Dodge Durango

1 Answer

Window keeps falling out of the black molding

Any trim shop that does windows & upholster for automobiles

Jan 09, 2009 | 1998 Cadillac DeVille

1 Answer

Seat belt repair

first for the switch in window
the window switch is easy to test you just gotta remove switch out of the door leaving it hang there is a way to test with a guaged wire with fuse on it
take the main power wire and touch to the other connectors on the main switch if the window goes down or up the switch is the problem
im suggesting this way first with fuse cause its easier then testing the windows motor inside the door frame the switches should just pop out of the panel with out haveing to take panel off

now the seat belts there are 2 style that are common to chevy
one is inside the molding of the drivers panel you gotta pop off the panels easily and gently to get at the seat belt retractor this will be bolted to the metal under the molding

the other style is in the seat which you gotta unbolt the seat under the top half it will need to be unbolted at the bottom top half of seat
when you pull threw the top section of top half of seat remember to tie a string to the end so that when you pull threw top half the string will be there so you can connect too new belt and pull back threw with ease make the string long enough to hang

now the bottom half of seat what i call the "**** seat" you remove the molding at bottom around the belt retractor this will be bolted to floor bolt also pull belt threw molding once molding removed
disconnect any electric wires

now saftey issue involved with seat belt removal is for a reason i dont know of the dealer ship always discharges the belts and air bags once removed i guess because of static electricity becareful when you remove belt and replacing belts cause static elec. can set them off
once your seat belt is removed place in card board box and take to dealer after complition of installing new belt they will discharge your seat belt for you and then you can dispose of it properly

May 29, 2008 | 2000 Chevrolet Suburban

Not finding what you are looking for?
2007 Toyota RAV4 Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides