I recently changed the oil on my truck (2008 F250, gas engine). About three weeks later, the message center displayed "CHANGE OIL SOON". Then a few days later "OIL CHANGE REQUIRED". I'm able to reset this message when i start the engine, but it reapears averytime i start it up. My oil pressure is fine, no leaks, and no red warning light. Any help in reseting this would be appreciated
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: OIL CHANGE MESSAGE DOES NOT RESET
Take it to Advance Auto, Auto Zone, or
O'Rielly's...they'll all read the codes for free. It will give you a
good indication of what caused the "CEL" and you'll find this forum
very helpful with regard to how to correct it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
TRY RESETTING OIL CHANGELIGHT BY TURNING THE IGNITION SWITCH TO THE ON POSITION WITH ENGINE OFF.TURN IGNITION SWITCH ON 10 SECONDS PUMP ACCELRATOR SLOWLY 3 TIMES .UNTIL OIL CHANGE LIGHT FLASHES THEN IT HAS RESET.
on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor. the message center should reset and go off. turn key off and then start car. to see if reset.sometimes you have to go slow 3 times to floor with gas pedal.MAKE SURE ENGINE IS NOT RUNNING WHEN YOU DO THE RESET.
Turn the ignition to ON, with the engine off. Fully
depress and release the accelerator pedal slowly three times within
five seconds. Turn the key to OFF If the CHANGE ENGINE OIL’ message
comes back on when you start your vehicle, the engine oil life
system has not reset. Repeat the procedure.
Montana 2001-06 wI (DIC) Driver Information Center
urn the ignition
to ON, with the engine off. Press the MODE button until the DIC
reads ‘OIL LIFE LEFT/HOLD SET TO RESET Press and hold the SET button
until 100% is displayed. You will hear three chimes and the “CHANGE
ENGINE OIL” message will go off. Turn the key to OFF. If the “CHANGE
ENGINE OIL” message comes back on when you start your vehicle, the
engine oil life system has not reset. Repeat the procedure.
Using the black push button/rod, you know the one where you can switch to see trip A trip B etc?
keep pushing it til you get to the check engine part then it will cycle
through several things. when you find the right place it will read "if
new oil hold reset" at this point just hold reset. That is the black
If this don't work, try it again, sometimes it may miss...
In your owners manual there is a procedure listed for resetting thr oil change reminder/maintenance light. Some vehicles you turn key on..do not start it.. step on gas pedal all the way to the floor 3 times... then key off. others haver u hold the trip odometer reset button when u turn key on.
It varies from manufacture to manufacturer.
Display "OIL LIFE RESET" on the Driver Information Center (DIC).
Press and hold the "ENTER" button for at least one second. An "ACKNOWLEDGED" display message will appear for three seconds or until the next button is pressed. This will tell you the system has been reset.
Turn the key to "LOCK/OFF". If the "CHANGE OIL SOON" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !
You have to reset it, I honestly am not sure about how for your particular model but I had a Grand Prix and several Pickups about that year that required turning the key off then back on and hitting accelerator pedal three times as I remember. Your owners manual are Goggle search for "rest Change Engine Oil 1997 Cadillac will find you the specific info you need for free. I hope I have helped you and Merry Christmas!