Question about 2000 Chevrolet Blazer

1 Answer

2000 Blazer will not start. It turns over.

I checked the fireing order it is correct.
I am not getting any fire to the spark plugs.
I am getting fule and air.
The distributor is good.
Everything is working but the fire in the spark plugs.
I just bought it> The guy had bought his wife a new family car so they parked the blazer. He gave it a tune up, cranked it and left it alone 2 Months ago. he had went out there to crank it and it would not start. What is wrong with it?

Posted by on

  • amandamburro Jan 21, 2009

    The starter is good. The only problem is no fire. I dont get it. Everything is good just no fire. I have tested this thing in every way. I ran ODB no codes came up past or present.

  • Anonymous Feb 01, 2009

    vehicle does start after a few seconds replaced battery but doesn't seemed to have helped much battery did check bad

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

You should have looked HERE (Edmonds.com) Brfore Purchasing this Vehicle! Check out the Complaints ans Recalls. There are a Number of things that it could be. have the Starter Relay Checked out. Then check your Relays.

Posted on Jan 21, 2009

  • Travis Humphries
    Travis Humphries Jan 21, 2009

    Check out the Posted Service Bulletins on this Matter on Edmonds.com The Dealerships Were replacing the Entire Distributor Shaft for this repair in the Past.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor turns but won't start


Insure you have all wires on correct plugs (use firing order) and if still no spark, test ignition module and coil.

May 27, 2015 | 2000 Chevrolet Blazer

1 Answer

95 chevy blazer won't accelerate, has rough idle and back fires


when was the last tune up done on it? have you checked the spark plugs and firing order to make sure it is correct?

Apr 21, 2014 | 1995 Chevrolet Blazer

2 Answers

No spark to engine 1991 ford pickup


It can be faulty or dirty spark plug itselfd.Also for reference get the fuel level checked.Is the fuel tank is empty or near to empty.
Try cleaning the spark plugs and then see if that is helpin.On some cases the black carbon layer gets collected on the spark plugs and that causes the problem,so cleaning the plugs help.But if its not helping,then spark plug has to be replaced.Spark plugs get power from ignition coil to ignite sparks.If ignitioncoils are faulty then also there will no spark.--------------

To troubleshot and confirm the issue,i suggest you to go through the help links provided below,check the procedure and it will help you to confirm the issue in your case.
----------
Click the link below:------

Car cranks, has spark but will not ?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html


-----------

The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

------------

How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html


---------------

How to Perform a Basic Engine Tune Up-Spark Plug and Wire Change

http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up_01.html


----------

Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

---------

How does the spark plug wire go on the distributor cap in 1991 Mitsubishi Mighty?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

------------
No spark on 2008 Chevy Avalanche?

http://schematicsdiagram.blogspot.in/2012/04/no-spark-on-2008-chevy-avalanche.html

-----------

How does the spark plug wire go on the distributor cap in 1985 Pontiac sunbird?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wire-go-on.html

--------------

Ford Plug Wires Not Coming out?

http://whoisbyme.blogspot.in/2012/06/ford-plug-wires-not-coming-out.html

--------

Ford explorer has no spark?

http://schematicsdiagram.blogspot.com/2011/12/ford-explorer-has-no-spark.html

----------


Chevy impala spark plug firing order diagrams?

http://technoanswers.blogspot.in/2012/02/chevy-impala-spark-plug-firing-order.html

------------

How to gap spark plug on Chevy Impala?

http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------

Spark plug Replacing for chevy impala?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

Chevy s-10 blazer 4.3l Spark Plug Firing Order?

http://howtobyme.blogspot.com/2011/12/chevy-s-10-blazer-43l-spark-plug-firing.html

----------------

1982 dodge rampage Spark plugs Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/1982-dodge-rampage-spark-plug-firing.html

----------------

2006 Suzuki Forenza Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html


------------

1983 Ford Ranger Spark plug firing order?

http://schematicsdiagram.blogspot.com/2011/12/1983-ford-ranger-spark-plug-firing.html

--------

Firing Order for 1991 Lexus ES 250?

http://schematicsdiagram.blogspot.com/2011/12/firing-order-for-1991-lexus-es-250.html

----------------

Firing order for 1992 Chevrolet 5.0 engine?

http://schematicsdiagram.blogspot.com/2011/12/firing-order-for-1992-chevrolet-50.html

-----------

How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

-----------

How to remove rear spark plugs on 1991 Buick Regal?

http://howtobyme.blogspot.in/2012/02/how-to-remove-rear-spark-plugs-on-1991.html


---------------

These details will help.

Thanks.

Nov 26, 2012 | Cars & Trucks

1 Answer

1999 chevy blazer not starting


Check the plug wire from the ignition coil to the distributor cap.
If you haven't already, replace the distributor cap and rotor.
The GM Vortec's have issues with moisture getting inside the cap and rotor and causing problems.

Apr 24, 2012 | 1999 Chevrolet Blazer

1 Answer

Replaced:plugs,wiresdistributor,fuel pump.truck wouldn't start before but now it starts but i am getting po135,po141,po147.po300 codes


P0135 means 0xygen heater circuit malfunction, P0141 mean 02 heater circuit bank1 sensor 2 (this is catalytic monitor) P0147 means 02 heater sensor circuit bank 1 sensor 3, P0300 is random misfire. You will get all the 02 code because of the misfire correct the misfire and the 02 should correct.We will start with the plug wire and make sure the firing order is correct 1996 chevy blazer that will make it a 4.3 engine size check the firing order firing order is 165432 also check the coil (it has a tendency to short you will know if it is) cansmo_181.gifcansmo_182.gifmake sure the distributor rotation is check

Sep 09, 2011 | 1996 Chevrolet Blazer

1 Answer

Car won't start. It turns over and tries to catch but won't go. Have had three fuel pumps replaced, but this does not seem to be the problem this time. A check with a hand held code meter shows it is...


If your Carb. is getting fuel that is not the problem, check the spark plug, while turning over the engine and see if there is a spark emitted from it?? if there is then check the owners manual for the correct firing order, then check to see that each plug wire is going to the correct piston port according to the firing order listed in the manual...once the Carb is getting fuel and the plugs are firing in correct sequence or firing order, it should start ...Good Luck

Nov 17, 2010 | 2003 Oldsmobile Alero

1 Answer

2000 Chevy Blazer Cranks but wont start...


What about the fuel filter????? Have you changed it out??? If you can spary something like a started fluid, that means it is a fuel problem. My last check, it has to be above 50-psi on the fuel pressure to make it run right. I had 35psi, but whould not get over 30mph or down hill maybe 45mph. Check both filter & pressure, but check pressure with a New fule filter!!!!

Jan 18, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...