Question about 1994 Geo Prizm
1994 Geo Prizm 1.8L, 112000 miles.
Get your hands on another am antenna....any one will do and attach it to your radio. If that clears it up replace the wire and antenna. If that does not then move to the radio as the suspect. The other thing I need to ask is how long have you had the car and has the AM worked on this before?
Posted on Jan 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
starters are actually pretty easy. usually just 2 or 3 bolts holding it on. Just disconnect the battery first. Remove the bolts and the starter and then installation is reversal of removal.
Hope this helps,
Posted on Sep 15, 2009
1994 Geo Car Stereo Wiring Schematic
Car Radio Battery Constant 12v+ Wire: White
Car Radio Accessory Switched 12v+ Wire: White/Black
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Red/Yellow
Car Stereo Dimmer Wire: Red/Green
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): Black/Blue
Right Front Speaker Positive Wire (+): Blue
Right Front Speaker Negative Wire (-): White/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Light Green
Left Rear Speaker Negative Wire (-): Light Green/Black
Right Rear Speaker Positive Wire (+): Gray
Right Rear Speaker Negative Wire (-): Gray/Black
Posted on Dec 23, 2009
Some vehicles only allow the brake lights to work when the ignition is turned on and control this via a relay which may have failed so the function is reversed allowing them to work only with the ignition off. Relays can 'weld' their contacts together causing them to become non-operational.Check in the central (if so equipped) fuse/relay box; if you are lucky the cover will have a diagram of the fuses and relays.If so, locate the relay for brakes, check the part number on it, exchange it with the same part number from a different function and try (while parked) to see if this has cured the problem by turning the ignition on, tapping the brake pedal to see if they now respond.If so, the original brake relay is bad.
Posted on Nov 21, 2011
Tips for a great answer:
Nov 12, 2012 | 2004 Kia Sorento EX
Sep 17, 2012 | 1991 Geo Prizm
Nov 09, 2011 | Cars & Trucks
Mar 16, 2010 | 2000 Volkswagen Golf
Jan 27, 2010 | 1994 Geo Prizm
Dec 23, 2009 | 1994 Geo Prizm
Sep 30, 2009 | 2003 Cadillac CTS
May 10, 2009 | 1994 Chevrolet K2500
Feb 03, 2014 | 1994 Geo Prizm
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: