Question about Mercedes-Benz Mercedes Bentz Actros Semi Tractor

Open Question

WHAT IS FAULTY CODE GS22 IN MERC ACTROS

SOMETIMES IT JUMPS GEARS AND WILL NOT ENGAGE REVERSE

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just put a new slave cylinder and clutch master cylinder on a 2003 Honda accord 3.0 V6 six speed and you can shift the gears without the clutch pedal pushed in or the car started


that is normal if the gear synchro dogs ( teeth) are in line in the box
problems concerning a clutch are
slashing gears when trying to engage first or reverse with the pedal to the floor ---needs bleeding
slipping when the clutch pedal is released--- slipping clutch from the pressure not being released ---problem in master cylinder
reverse gear is the only gear not synchronised so even with the clutch depressed it is possible sometimes that it will not go into gear unless you let the clutch up to move the gears in the box then attempt to re-engage reverse

May 04, 2016 | Honda Cars & Trucks

1 Answer

96 ROVER DISC. Has strong reverse - won't engage any forward gears. Fluid seems full even when warm.


Make sure the 4wd shifter is in correct position and hasn't slipped out of correct spot to get you moving forward.

Mar 27, 2013 | 1995 Land Rover Discovery

1 Answer

C3 picasso can jump out of reverse if not rammed in hard


Transmission problem. I suggest getting it serviced or put a new transmission in it

Mar 18, 2013 | Cars & Trucks

1 Answer

Galant vrg-gdi-when i engage reverse the car stalls--but once you start moving --ok


You vehicle uses a Idle air control motor,(IAC) when you put a load on the vehicle (Drive or reverse) the ECM detects the load and idles up the IAC, even for the A/C (air conditioner) You can try a throttle body cleaning. or a new IAC

Mar 01, 2012 | Cars & Trucks

2 Answers

Sometimes the 4 wheel drive doesn't engage. what


has the fluid in the transfer case ever been changed out? if so do that, it may solve yopur problem

Oct 01, 2009 | 1994 GMC Sierra

1 Answer

Issues when changing gears in a automatic 2001 Volkswagen passat. Car kind of jumps or shakes when changing gears from Park to reverse or to drive. But works fine when changing gears into 4, 3, or 2.


it is bcause the trans shifts opposite diection when going from reverse to drive but i would check mounts where they bolt to trans have seen them with broken bolts

Aug 23, 2009 | Volkswagen Passat Cars & Trucks

1 Answer

Gears change without a command from the driver.


There is a vacuum controlled selector valve on the selespeed alfa's it tricky to get at and expensive to replace. Have it sent to an alfa specialist or main dealer and they ll sort it

May 05, 2009 | 2000 Alfa Romeo 156

1 Answer

1991 Ford F150 Jumps out of 4W drive sometimes in reverse


My 94 did the same thing. In a automatic, you have to come to a full stop, it usually grinds when in 4L ,And for the shifter, I had to look at mine, 2w is all the way forward to the dash, then 4H is toward you 1 click, and "N" is the next toward you, then 4L , you have to push the lever down and pull backwards. Always come to a full stop when changing gears and wait a few seconds before changing direction.

Jan 13, 2009 | 1991 Ford F150

Not finding what you are looking for?
Mercedes-Benz Mercedes Bentz Actros Semi Tractor Logo

Related Topics:

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...