Question about Cars & Trucks

Open Question

Evo to vr4 air flow diagram - Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing digram v6 2500cc mitsubishi vr4


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.

Best Manuals

Jun 30, 2016 | Mitsubishi Cars & Trucks

1 Answer

Vr4 won,t start was going an is turning over


It may not be getting fuel. You have to maybe look to changing the inline fuel filter or have the fuel pump itself checked for operation. The fuel pump is in the gas tank, but you can check fuel flow by separating the line at where it goes into the injectors. Put a plastic container under the line where separated and crank the engine a couple times and see if you have fuel flow. Often times the inline fuel filter gets gunked up by sediment from the gas tank and blocks fuel flow.

Mar 24, 2011 | 2001 Ford Explorer Sport

3 Answers

I need firing order diagram for 1991 mistubishi 3000 gt vr4


1991 Mitsubishi 3000GT AWD 3.0 liter DOHC V-6

14f3d03.gif

Hope helps (remember rated this).

Jul 21, 2010 | 1991 Mitsubishi 3000GT

1 Answer

89 mitsi vr4, i have gearbox loss, somthing catching bye thrust b


seized on main shaft spines.If you can spray DW40 on the splines and leave for a while should.come out shacking and pulling.

Jun 08, 2009 | 1989 Mitsubishi Galant

1 Answer

Mitsubishi evo/vr4 idle fluctuating between


Galant VR4 or Evo. which car is it?

have you reset the ecu? disconnect the battery for 5 minutes. make sure you have any radio codes if your radio has a security code lock.

Also could be the idle control stepper. Mitsu gives it some name like ICU but it's a small mottor attached to the throttle that opens and closes valves to let a little more air in and up the rpm.if it's sticky try cleaning the throttle and the valves.

May 05, 2009 | 1988 Mitsubishi Galant

1 Answer

How to remove a 1989 e39a vr4 engine


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 13, 2009 | 1989 Mitsubishi Galant

1 Answer

I am trying to install a 5in taco gauge and was woundering what do i connect the green wire on the gauge too? its a 1988 galant vr4 model.. any info would be greatful... thanks


its either pin 109 or pin 54. 109 Ignition pulse detect (tach) 54 Power transistor for #1 and #4 coils
a781e49.gif
the diagrams from the S-AFC has this diagram. which uses pin 54.
e1d3e92.jpg
i would try pin 109 first, if that doesn't work, try pin 54. its possible that they will both work.

Oct 10, 2008 | Mitsubishi Galant Cars & Trucks

2 Answers

Power steering - 1999 chevy silverado


You're going to have to bleed the system alot on those trucks. Just remove the return line and have an assistant turn the steering wheel back and forth just enough to engage the pump and filling the resevour while doing this. Keep bleeding until you have a good flow of P/S fluid out with no air bubbles. This can take a while.

Aug 24, 2008 | 1999 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...