Question about 2006 Scion xB
LR tail light doesn't work after replacing with new bulbs.
Sounds like you have blown a fuse.
Check through the fuses with a test light.
Good Luck !
P.S. Don´t forget to give me a rating please !
Posted on Jan 21, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 26, 2017 | 2003 Cadillac Escalade
on Dec 18, 2009 | BMW 650 Cars & Trucks
Jul 18, 2014 | 2003 Chevrolet Avalanche
Aug 27, 2012 | 1998 Buick LeSabre
Aug 05, 2012 | 2000 Ford Expedition
Jan 27, 2011 | 1999 Volvo C70
Dec 29, 2010 | 2000 Lexus RX 300
Dec 28, 2010 | 2005 Jeep Liberty
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Jun 12, 2010 | 1987 Honda Civic
690 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: