Question about 1992 Saturn SC

1 Answer

Shifting and or clutch

Hard to shift and when i do i haft to have the clutch all the way to floor and sometimes that dont work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

If there is a hydraulic clutch in that car, check the master cylinder for the clutch and see if it's full of fluid, if it is, you might have a bad slave valve.

Posted on Jan 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clutch pedal is not working. falls right to the floor. have to drive by hard-shifting. in my '88 audi 90 quattro


You have a leak and will need to replace the clutch master and slave cylinders.

Jun 11, 2012 | Cars & Trucks

2 Answers

Replaced Clutch, master cylinder and slave cylinder on my 85 F250 diesel. The truck shifts ok when it is cold, once it warms up it wont shift using the clutch. you have to use RPMs to make it shift. I...


these are very hard to bleed, also check your fire wall for damage where the clutch master bolts up. another thing is take a good look at the clutch pedal asm, the frame sometimes wears and cracks so you loose a little pedal travel.another thing is a bad preasure plate,spring breaks on plate,

Mar 10, 2010 | 1985 Ford F 250

1 Answer

HARD TO SHIFT, THOUGHT WAS COLD???


Simple short answer..you need a clutch disc

Jan 06, 2010 | 2000 Hyundai Accent

1 Answer

2003 Nissan Sentra SE-R Spec-V clutch sticking and hard shifting


I am dealing with a very similar issue on my 03 Spec V , So far i noticed the clevis pin was loose and the locking hitch pin that slips thru it had fallen out . this caused the gears to not wanna engage due to the bolt behind the clevis which runs to the master cylinder was not getting pressed in when i pushed the clutch pedal in because the clevis pin was slippin on n off giving me no pressure up top .. I had to remove my lower dash panel in order to get visual n hand access to this pin , it is a tight spot to work in as well . May be easist to remove the 4 14mm bolts that hold yur driver seat in to give ya more room to work n stretch out ur arms

Sep 19, 2009 | 2003 Nissan Sentra

1 Answer

1979 Datsun 280zx clutch problem


Well, Your are going to have to put a few bucks into a new clutch , disc, pressue plate.
A local transmission shop should be able to help you out.

Mar 15, 2009 | 1997 Chevrolet Cavalier

1 Answer

Grinding and very hard to shift, and now the shifter is stuck


how does the clutch pedal feel?..clutch out of adjustment,needs clutch job...kev-mn.

Dec 10, 2008 | 1995 Pontiac Sunfire

1 Answer

2000 Toyota Clutch replacement


Whenever you have additional floor mats in the vehicle, the clutch pedal does not go to the floor. This, in turn, prevents the clutch release mechanism from releasing the clutch disc fully from the flywheel. This causes premature clutch disc wear. I would agree that you need a clutch replacement.
The replacement is pretty straight forward, as long as your guy has the ability to support & hold the engine assembly while the transmission is removed.
No big mysteries on the clutch replacement.

Dec 08, 2008 | 2000 Toyota ECHO

1 Answer

1992 ford explorer not shifting right


ok... there is a problem with these sorts of things. sometimes the clutch will ge a condition called clutch dust. and its caused by grinding and hard shifting. sometimes poor alignment. take your vechile to a tranny shop and have them do an inspection on your clutch.

Sep 24, 2008 | 1992 Ford Explorer

2 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
1992 Saturn SC Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...