Question about 1988 Chevrolet Suburban

1 Answer

1988 chevy suburban 350 engine will not start .

The engine will turn over but seems not to be getting fire, also no lights will work . I drove home from work last night parked it. This morning it wouldn't start.

Posted by on

  • Anonymous Apr 04, 2009

    my truck cranks over but will not start replaced the fuel pump but still no results

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Battery and or charging system

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 Chevy V8 5.7L 350 4bbl . My vin starts with 2GBJG31M9J4 . it is a RV jamboree with the chevy 1 ton heavy duty emission. does anyone know where I can find a vacuum diagram?


Vacuum Diagrams - AutoZone

www.autozone.com/repairinfo/.../repairGuideContent.jsp?page...

AutoZoneGM Chevy Mid-Size Cars 1964-1988 Repair Guide ... Fig. Fig. 4: 1971 V8 enginevacuum hoses ... Fig. Fig. 12: 1976 350 V8 engine-4bbl with EFE and AIR injection systems .... Fig. Fig. 52: 1980 5.7L V8 engine-automatic transmission federal. images for 1988 Chevy V8 5.7L 350 4bbl vacuum ...

Nov 23, 2015 | Cars & Trucks

1 Answer

1988 chevy suburban 1/2 ton auto trans; 4 wd; dies after putting into drive


Could be a dirty throttle body or faulty idle air control valve.
Is the check engine light on ?

Jul 09, 2012 | Chevrolet Suburban Cars & Trucks

1 Answer

What is the firing order for 1988 suburban 350 engine


Check this for 1988 Chevrolet Suburban ½-Ton 4WD 5.7 liter V-8 VIN "K"

zjlimited_259.gif

Hope this helps (remember to rate and comment this answer).

Mar 21, 2011 | 1988 Chevrolet Suburban

2 Answers

Firing order for a 1993 GMC Suburban?


1988-95 4.3L Engines Firing Order: 1-6-5-4-3-2 Distributor Rotation: Clockwise


tecnovative_150.gif

1988-95 5.7L and 7.4L Engines
Firing Order: 1-8-4-3-6-5-7-2 Distributor Rotation: Clockwise


tecnovative_151.gif

Feb 24, 2011 | 1993 GMC Suburban

2 Answers

Firing order 1988 chevy 350 my kid changed wires on my truck and mest up


1988 Chevrolet K 1500 P/U 5.0 liter V-8 VIN "H"

ce60e96.gif

Hope helps.

Oct 29, 2010 | 1988 Chevrolet K1500

1 Answer

I just bought a 1988 Chevy Suburban. I drove it home on Friday with no issue. I then drove it all day today while starting it and stopping it with no issue. I then parked it for a few hours. It now won't...


I would try to get a fuel filter first and replace that if that isnt it you probably have a issue with the fuel pump. also try taking a hammer and bang lightly around were fuel pump is located in the gas tank.If you have a issue with fuel pump and dont no how to drop tank and replace it you would be wise to shop around because it could save you hundreds of dollars.

Sep 13, 2010 | 1988 Chevrolet Suburban

1 Answer

I have a 1982 chevy truck with an 88 350 sbc with 82 distributar


Double check your timing.Make sure the wire going to the BAT side of dist. is hot. That dist. should work just fine DRIVE SAFELY TIM

Feb 18, 2010 | 1983 Chevrolet Silverado

1 Answer

1989 350 runs rough for a while after ineling


have the converter checked it may be partially clogged

Jan 29, 2009 | 1989 Chevrolet Suburban

Not finding what you are looking for?

Open Questions:

0 Answers

1988 5.7 TBI Nightmare This is the start of what the problem was and is, I had a RV cam installed when the engine was rebuilt a year ago. the cam was not a computer friendly cam so after a round with the rebuilder and discovering the specs weren't the correct ones for the cam I installed a 3702 edelbrock cam and lifters with a 7800 timing chain and gear set after I had tried two chips from Jet and no improved performance and the 3rd chip was to be for the cam and that is what is in the ECU now and I have tried about 5 different BCC chips and the bottom line is the power is there but something is happening its hit and miss the idle will sometimes lope, is stalled when first started and acts as if its starving for fuel or its bogged with to much fuel. the fuel pressure is 10 - 13 psi and I have R/R the TPS, IAC, ESC and knocks device , EGR and Solenoid, MAP, Temp sensor, and the Dist is a Procomp 10001 with a MSD-5526 coil. the Throttle Body was rebuild and the ECM was replaced with a Rebuilt ECM. it will smell rich etc. but with the things that goes on it does not show any codes?? I have no clue just feel stupid this is been a simple thing that is kicking my **** and now its a challenge but still loosing the fight too far in and too much spent to stop,. LOL Help !!!! The BCC is a california vehicle AFBX, 5.7TBI TH400 A/T P.S. the key can be turned of and back on as the engine not dying and seems to correct the power and run problems but will not last goes back to running bad or with problems. ?

Jul 26, 2012 | 1988 Chevrolet Suburban

See all 1988 Chevrolet Suburban Questions

Cars & Trucks Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...