Question about 1993 Toyota Pickup

Open Question

What is a self adjusting clutch master and slave cylinder

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1985 TOY 4X4 PICK UP HARD TO GET INTO FIRST GEAR

May be a syncro ring going out. A tranney shop can rebuild the trans and change out the syncros or if you are good with mechanics you can get a book for your tranny and do it yourself. Most manual tranneys are not too hard to do.

Posted on Mar 23, 2009

Ad
  • 7 Answers

SOURCE: replace slave cylinder on 89 toy.corolla sr5

If it was selecting gears ok before the clutch was replaced then the slave cylinder should be ok, it may just need bleeding. If it was playing up before, you can get them rebuilt by a brake specialist or a wrecker would be a cheaper option. They are very easy to replace, hardest part is bleeding them which is what I suspect is wrong with yours.

Posted on Apr 10, 2009

  • 205 Answers

SOURCE: no pressure on cluth pedal

You have air in the system, Keep the reservoir full, attach a hose to the bleed screw the other end of the hose in a small clean jar. Open the bleed screw, push the clutch pedal to the floor, close the bleed screw, repeat over and over till you are getting fluid and NO bubbles. do not reuse the brake fluid. When the bubbles are gone your clutch will work.

Posted on May 01, 2009

  • 474 Answers

SOURCE: My 2000 Toyota Tacoma 2.7 liter 4 cylinder truck

sounds like its time for a new clutch

Posted on Oct 31, 2009

  • 3 Answers

SOURCE: Clutch lost all resistance. No fluid in the master cylinder

Had the same sort of thing happen to me, it was a bad seal in the slave cylinder. Replaced it and everything works fine now.

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Biting point too high how do I adjust it the clutch is hydraulic and I have a inch or less from biting point to no foot on clutch


as you hav'nt mentioned vehicle etc as a general rule hydraulic clutch's self adjust , so yours would appear to need a new clutch

Nov 04, 2014 | Cars & Trucks

1 Answer

How to set master clutch adjustment to gearbox lever


Clutch slave cylinders are usually self adjusting. Bleed system and check clutch operation. If actuator rod is not the sdjustable type then you may have a problem with the actual clutch pressuer plate or driven plate.

Oct 09, 2014 | Cars & Trucks

1 Answer

Cant locate clutch cylinder 1988 Honda accord lx 5 speed trasmssion


If it is a hydraulic clutch, and not cable operated, there will be two cylinders. A clutch master cylinder will be mounted on the firewall next to the brake master cylinder. One steel line will go from the master cylinder down to the slave cylinder bolted onto the transmission housing where the clutch lever extends out of the housing. Other than bleeding the slave cylinder, no adjustments are necessary on hydraulic clutches. Cable operated clutches have an adjusting mechanism to take up slack when the clutch disc wears. The adjuster will be inside the engine bay.

Sep 22, 2013 | 1987 Honda Accord

1 Answer

I just replaced the clutch in my car and i need to find out if there is an adjustment for it or if its self adjusting


it is hydraulic activated, there is no adjustment. there is a small master cylinder attached to your clutch pedal, and it operates a small slave cylinder which moves the throwout bearing in and out.

Aug 17, 2011 | 1996 Saturn SL

2 Answers

2008 corvette 11,200 miles on it clutch won't release


YOUR WARRANTY SHOULD FIX IT. SHOULDNT HAVE TO FIX YOUR SELF.POSSIBLE CAUSE CLUTCH MASTER CYLINDER FLUID LEVEL.IF LOW CHECK MASTER CYLINDER SLAVE CYLINDER LINES FOR LEAKS FIX AND BLEED CLUTCH HYDRALIC SYSTEM.IF CLUTCH MASTER CYLINDER FLUID LEVEL OKAY.THE CLUTCH DRIVEN DISC PRESSURE PLATE NEED ADJUSTMENT.I WOULD LET YOUR FACTORY WARRANTY FIX IT.YOU SHOULDNT HAVE TO PAY ANYTHING.JUST MAKE SURE FLUID IN CLUTCH MASTER CYLINDER NOT LOW WHEN YOU TAKE IT TO DEALERSHIP.IF THEY CHECK IT OUT FIND ANY KIND NEGLECT TO VECHICLE.THEY WILL NOT PAY.THEY WILL FIX BUT YOU WILL PAY OUT OF POCKET EXPENSE.

Oct 14, 2010 | 2008 Chevrolet Corvette

1 Answer

Is there any way to adjust the clutch on 2006 Kia Spectra5?


YOU HAVE HYDRALIC CLUTCH WHICH IS A CLUTCH MASTER CYLINDER WITH SLAVE CYLINDER.IF YOU HAVING CLUTCH PROBLEMS.CLUTCH IS WORN AND SLIPPING OR YOU HAVE LOW FLUID LEVEL IN CLUTCH MASTER CYLINDER.WHICH CAUSES AIR GET IN HYDRALIC SYSTEM.CAUSING CLUTCH PROBLEMS.IF CLUTCH MASTER CYLINDER IS LOW ON FLUID.CHECK HYDRALIC LINE ON SLAVE CYLINDER TO CLUTCH MASTER CYLINDER FOR FLUID LEAKS.

Aug 03, 2010 | 2007 Kia Spectra5

2 Answers

Having problems with the clutch in my 1998 Ford Ranger. There is no freeplay, and it is very difficult to shift. Do I need to adjust the clutch? If so, how do I adjust it?


The clutch is not adjustable,it is a fluid clutch.It has to be a leak,or the slave cylinder,and,or, the master cylinder are bad,It does not have to be leaking to be bad,but it is one of the two.Rate please,thank you.

Jul 12, 2010 | 1998 Ford Ranger SuperCab

2 Answers

Can i adjust a clutch on a 1996 honda civic, it seems to be a little low


IT IS HYDRAYLIC AND SELF ADJUSTING, SOUNDS LIKE U NEED A MASTER OR SLAVE CYLINDER.

Jul 08, 2009 | 1997 Honda Civic

3 Answers

Clutch


Stop driving the car now! The clutch master cylinder has an adjustable pushrod, it is set up too long now. Take it back to where it was done and tell them if they don't know how to set up clutch free play, they shouldn't have attempted the job. This may have cost you a $3500. clutch job. Get it adjusted fast.

May 05, 2009 | 1991 Porsche 944

2 Answers

Clutch adjustment 95 Jeep YJ


no, there is no clutch adjustment. the clutch is hydraulic, and self adjusting, there are several things that can go wrong with these. with normal wear the fluid can run low allowing air into the system, causing a weak peddle. they can also develop leaks in the master and slave cylinders resulting in fluid loss also causing a weak peddle leading to an inopperative clutch. check the fluid level in the clucth master cylinder(next to the brake master cylinder. if it is empty, refill it(it takes brake fluid) then cycle the clutch peddle a few times and check for leaks. if there is air trapped in the line the clutch will need to be bled. there is a bleeder screw on top of the slave cylinder, bleed it just like bleeding brakes.

Apr 24, 2009 | 1995 Jeep Wrangler

Not finding what you are looking for?
1993 Toyota Pickup Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...