Question about Dodge Stratus

Open Question

Diagram for heater blend door actuator on 2001 dodge stratus

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Blend door

ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min

Posted on Dec 15, 2008

Ad
taran_2005
  • 10515 Answers

SOURCE: diagram for serpentine belt for 2001 dodge stratus

Hi,


There would be 2 links you can refer :-

http://autorepair.about.com/library/weekly/aa071205b.htm

http://www.serpentinebeltdiagram.com/

These 2 links would help you to have an idea that would really help you to fix this.

Copy and paste the above links in browser and click enter.

Any further help, let me know.

Thanks for using "Fixya".

Posted on Jun 04, 2009

  • 4341 Answers

SOURCE: On-line parts diagram AC/Heater

Blend doors are in the heater and A/C box, typically not a job for non professional, very very delicate

Posted on Sep 07, 2009

  • 1 Answer

SOURCE: blend door actuator needs replacing does the

no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa

Posted on Nov 25, 2009

  • 5 Answers

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 dodge stratus heater control valve where is it


No heater control valve on this vehicle . Air temp is controlled by a blend air door and door actuator

Jan 05, 2018 | Dodge Cars & Trucks

2 Answers

1998 Dodge Stratus - Air conditioning is blowing through the defrost vents


Vacuum controls this circuit and leaks will cause blend air door to default to defrost. Check for bad check valve or hose leaks under hood first as these are the easy ones to get at and under hood heat causes deterioration.

Jul 08, 2015 | 1998 Dodge Stratus

2 Answers

2000 dodge durango


I assume this truck has daul zone heating and a/c, the air blows but is not hot? if this is the case then you may have dissconnected the blend door actuator or it just went bad. this is common that the actuator goes bad,
there are two seperate actuators that control the hot/cold door in the heater box this way the passenger and driver can set there on temp.
the actuator for the drivers side is locted on the drivers side under the dash on heater box, the blower is on the passenger side , you can check connections but i do not think it is that but rather the actuator.

Jan 16, 2013 | 1999 Dodge Durango

1 Answer

When you move the controls in the heat position you have no heat but a thumping sound up under the dash


your blend door is not actuating. The door may be jammed or the actuator gears may be slipping. Remove the actuator and check the door for free operation. If the door is jammed, you may need to open the heater box to unjam. If it is free, replace the actuator.

It looks like the actuator is right on the front of your heater box--see diagram below.4ad64fe.gif

Oct 03, 2010 | 2001 Ford Windstar

4 Answers

NO heat in front of 2001 windstar van. Thumping


Blend air door may be stuck. I removed a pencil from a heater box before. It had fallen from the dash, down through the defrost vents and jamed the door.

Nov 13, 2009 | 2001 Ford Windstar

1 Answer

No heat Heater core is hot


If heater core is getting coolant circulating through it then you may have a temp blend door, or blend door actuator not working properly. The blend door is located in the air box under the dash, and the actuator is located on the air box. You may be able to visually check the operation while turning the temp knob, by locating the coresponding actuator on the air box and monitoring the movement. If it is moving ok and still no heat then the blend door, or lever is broken, which will require removal of the dash.

Oct 17, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Heater


Check coolant level and then check to see if both heater hoses are hot. If on is hot and the other luke warm or cold, you might have a plugged heater core. If both are hot then you might have a problem will the what they call a "blend door actuator". Both need to be diagnosed be a mechanic because they will required the dash to be removed to be repaired. $$!!!
Good luck
Harry.

Oct 29, 2008 | 2002 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...