Question about Mazda B2300

Open Question

P0401 MADZA 1996 B2300 - B2300 Mazda Cars & Trucks

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 135 Answers

SOURCE: temperature gauge doesnt move

First check the wire to the temperature sensor. It may have come unplugged. If it is still connected, check the wire with a light tester for power to the temp. sensor. If it has power to the sensor check the other wire while it is connected to the sensor. It should light up the test light(must have the key turned on) on both wires. If it only lights one, change the temperature sensor. If current is present in both wires, you either have a short in the wire back to your gauge or if power is present at the terminal on the guage, you have a faulty temperature gauge.

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel leak on 1996 b2300


It has fuel injection instead of a carb, so the fuel line has about 35psi at all times. The inline fuel filter could be in the area you think is leaking.

Jan 17, 2013 | Cars & Trucks

1 Answer

1996 madza milenia want fire


You need to get a code reader frist to tell you what wrong ...and check your coil to see if it fireing.

Aug 18, 2012 | 1996 Mazda Millenia

1 Answer

Check engine light came on 1996 acura slx code reads p0401


Code P0401 indicates insufficient EGR flow. It's quite common on this model. The solution involves removing the upper intake manifold and cleaning the EGR passage.

Apr 16, 2011 | Acura SLX Cars & Trucks

1 Answer

My 1997 madza b2300 5speed manual shifter 4 cyclinder pickup cant change gears with motor running with engine off can change to any gear whats wrong with truck


Here are some suggestions for you to try.If there is any kind of adjustment try that first.If that doesn't work then I would have your clutch inspected for extreme wear if it hasn't been changed.

Mar 06, 2011 | 2007 Mazda B2300

4 Answers

I have four codes. P0136, P0141, P0171, P0401.


p0136 and p0141 are o2 sensors and p0401 is a egr flow and the p0171 means its running lean on low bank 1

Jun 30, 2010 | 1996 Ford Econoline

2 Answers

Codes P0401 and P0441 on a 1996 98 Olds


P0401--- the egr valve has insufficient air flow. Needs to be taken off and cleaned, if not replaced. The port holes might be clogged up, or the valve itself might be bad.
P0441---- The evaporative emission control purge valve has low air flow, probably do to the egr valve.
If you take off the egr valve, you will need to replace the gasket, or it won't seal right when it's put back on.

May 05, 2010 | 1996 Oldsmobile Ninety Eight

1 Answer

How do you line up the timeing,when changing the timeing belt. 96 mazda b2300


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Mazda B2300 Pickup. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/mazda/model/b2300/1996_mazda_b2300_timing_belt_diagram_marks.htm

Sep 03, 2009 | 1996 Mazda Pickup

1 Answer

Temperature gauge doesnt move in my madza b2300. What could this be?


First check the wire to the temperature sensor. It may have come unplugged. If it is still connected, check the wire with a light tester for power to the temp. sensor. If it has power to the sensor check the other wire while it is connected to the sensor. It should light up the test light(must have the key turned on) on both wires. If it only lights one, change the temperature sensor. If current is present in both wires, you either have a short in the wire back to your gauge or if power is present at the terminal on the guage, you have a faulty temperature gauge.

Jul 09, 2009 | 2007 Mazda B2300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...