Question about 2006 Ford Expedition
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Initially, try to determine which fuse goes to the power window. Check and replace if necessary.
In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.
Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.
Incidentally, here is a nice tutorial on repairs of power windows in general.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on May 31, 2008
I am going to ask a dumb question....do you have it in neutral and the brake mashed when you switch to 4WD LOW? I believe that is what my book says to do.
Posted on Oct 27, 2008
sounds like its stuck.this was never a good system. if you have the owners manual follow it to a T. ussually if you find a dirt lot engage the 4x4 run it for a few then shut it off. then back up ten to twenty feet this will set things right
Posted on Oct 03, 2009
Possible solution..Expedition uses a vacuum solenoid on the firewall that controls vacuum to the 4-wheel drive actuator. Vacuum "unlocks" the 4-wheel drive, so you may have a leak in the line to the actuator so the 4-wheel drive is always on. Seems backwards, I know.
Posted on Dec 29, 2009
Tips for a great answer:
Oct 07, 2015 | Cars & Trucks
Nov 21, 2011 | Cars & Trucks
Apr 04, 2011 | 2004 Ford Expedition
Nov 23, 2010 | 1999 Ford Expedition
Nov 04, 2010 | 2003 Ford Expedition
Oct 14, 2010 | 2004 Ford Expedition
Dec 07, 2009 | 1997 Ford Expedition
Nov 14, 2009 | 2004 Ford Expedition
Nov 08, 2009 | 2003 Ford Expedition
55 people viewed this question
Usually answered in minutes!