Question about 2004 Nissan XTerra

Open Question

"Codes P0217 and P0328 together for a Nissan Xterra 2004"

Failed Emissions at MA State Inspection

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 45 Answers

SOURCE: pcv valve and emissions

when you are looking at the motor it is located on the valve cover it has about a half inch diameter hose attatched to it. i belive it threads into valve cover. also try going to local auto parts store and look at a haynes manual

Posted on Dec 27, 2008

Ad
localwonder
  • 6784 Answers

SOURCE: 2004 Nissan Xterra. Battery died and now the radio will not turn

Hi, check the fuse box for a blown fuse in the radio slot. sometimes during jumps, this fuse will blow.

Posted on Mar 06, 2009

steve_baldam
  • 52 Answers

SOURCE: Nissan Xterra SE 2004 - Front Hood Emblem Removal...?

Think it got two pins held by plastic grommets

Posted on May 13, 2009

  • 521 Answers

SOURCE: OBD CONNECTION 2000 NISSAN FRONTIER

if the scanner will not communicate with the ECm, First check all the fuses under the hood. If all is well, make sure you have the key on and not off or running. If all is good there then the computer for the car has taken a vacation on you and will need to be taken to the dealership for repair/re-programming.

Posted on Aug 10, 2009

  • 1 Answer

SOURCE: I have a 2003 xterra SE Supercharged, I was

I had the same thing but it was my sparkplug wire was arching on the valve covers. my rmps would drop at idle so i look at the engine at night time and could visualy see the electrical arch real easy ,and the computer on your car reads the arch as a misfire, which it is, but the cause isnt your knock sensor just one cylinder is not having a fuel mixture ignition due to the spark not conducting throught the plug and ignighting the mixture.hence ur miss fire. Also ur can hear it, it kind sounds like a snaping noise once you have poped the hood that helped me find where it was at.

Posted on Feb 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 nissan xterra code p1000


Means it hasn't completed a driveability cycle. I ignore it. But I live in a non inspection state. If you need it cleared. Then you have to look at the readiness state of the sensors. See what failed. Takes a scanner. Also, you can get past the code with a scanner in about an hour. Otherwise it could take up to a month with regular driving. Part of the procedure is. Driving in stop and go traffic. Driving at 30,45, and 60 MPH for so many minutes. Scanner tells you what to do.

Aug 06, 2016 | 2006 Nissan Xterra S

1 Answer

My 2001 dodge intrepid failed emissions says due o excessive of readiness monitors 'Not Ready'


you must not clear codes or unhook battery after doing what they call a drive cycle which resets monitors to a ready state. http://www.lhforums.net/forums/showthread.php?2755-OBD-II-and-your-Next-State-Inspection
press helpful button

Dec 18, 2015 | 2001 Dodge Intrepid

1 Answer

2004 nissan xterra run great for 12 miles then misfiring,cnt get over 45 miles an hour. codes p 0733,p0420,p0430,p0328 comes up. new wires,new cap,rotor spark plugs 6 months old timming belt 6 months...


code p0733 refers to gear 3 -incorrect ration===causes---wiring---TR sensor/switch--shift solenoids---transmission mechanical fault
code p0420 refers to catalytic converter system -bank 1---efficiency below threshold===causes--cat converter--wiring--HO2s 2
code po430 refers to cat converter system bank 2--efficiency below threshold===causes--cat converter--wiring ---HO2s 2
code p0328 refers to knock sensor (KS) 1 bank 1--high input===causes--wiring short to positive--KS incorrectly tightened--KS---ECM

basically replace the cat converters as they are blocking the exhaust system and preventing your over 45mph problem
replace the TR sensor/ switch as you have not mentioned a transmission problem
Rectify the problem with the KS as it controls the air/fuel mixture setting which contributes to the car getting hot.

Jan 12, 2014 | Nissan Cars & Trucks

1 Answer

While coming to a stop, my 2004 Nissan frontier died. Checked fuel pump, it did come on, checked to see if getting fire. Could not get fire from any plug wires. Checked codes came up with P0340 &...


Sorry to the bearer of bad news but i have a funny feeling your ECU unit has failed ,where is it located on this vehicle anywhere near the engine where it can get hot?

Nov 29, 2013 | 2004 Nissan Frontier XE

2 Answers

Car died. Cranks, but wont start. Codes P0328, P0340


Yes, if the camshaft position sensor has failed, your vehicle won't start.

Jun 11, 2013 | 2004 Nissan XTerra

1 Answer

P0420 and p0328 2002 nissan xterra


Trouble Code: P0328

Knock Sensor Circuit High Input (Bank 1)

Possible Causes:


Knock sensor signal circuit is open.Knock sensor signal circuit is shorted to VREF or system power.Knock sensor is damaged or has failed.Trouble Code: P0420

Catalyst Efficiency Below Normal (Bank 1)

Possible Causes:


Air leaks at the exhaust manifold or in the exhaust pipes.Catalytic converter is damaged, contaminated or has failed.Front HO2S or rear HO2S is contaminated with fuel or moisture.Front HO2S and/or the rear HO2S is loose in the mounting hole.Front HO2S older (aged) than the rear HO2S (HO2S is lazy).

Jan 27, 2013 | 2002 Nissan Xterra

1 Answer

How to install a EGR valve on a 2003 Nissan Xterra


EGR is for NOX

Too Rich a fuel mix is HI CO

Are the front or upstream oxygen sensors over
100,000 miles?
Air Filter new?
Always change oil before inspection & use full synthetic
Spark plugs over 2 or 3 years,won't pass insp
Clean MAF Sensor

Nov 23, 2012 | 2003 Nissan Xterra

1 Answer

Replaced the fuel level sending unit in 2005 Xterra...how do I get my Service Engine Soon light off?


I had that problem too but it ended up being the vent valve. It's a part that goes with emissions. It's the part of the car that when you drive it this vent closes and recirculates the emissions and when the car is shut off, it opens up to keep it ventilated. I'm having it repaired for $250.00 in New Bedford, MA. Hope this helps!

Sep 30, 2010 | 2005 Nissan Xterra

1 Answer

OBD works with dealer computer, fails with Registry computer


in mass if the tps light is on it will not pass because it is a safety issue.

Jul 01, 2017 | 2004 Volkswagen Touareg

Not finding what you are looking for?
2004 Nissan XTerra Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...