Question about Cars & Trucks

Open Question

The line joining the top of a hill makes an angle of 30 with the horizontal through the foot of the hill there is one temple at the top of the hill and a guest house half way from the foot to the top the tops of the temple and guest house both make an elevation of 45 at the foot of the hill if the guest house is 100 m away from the footof the hill along the hill find the heights of guest house and the temple

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 10865 Answers

SOURCE: air filter replacement

drive to the nearest auto zone store ans have them assist you which they do as a free service, in fact they even let you use their tools.

Posted on Apr 21, 2009

  • 4044 Answers

SOURCE: find the height of the

How is this homework question related to a BMW? It is basic Algebra. Please search under that heading.

Posted on Mar 02, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Trump's Flag Pole

  • Polar Opposition : > Fact Check > Politics > Donald Trump Polar Opposition; Polar Opposition Did ... Trump put up a 50 foot flag pole even though 30 foot ... course construction had them build a 20 foot high grassy hill and ...
  • Did Donald Trump erect a flag on a man-made hill to skirt ... Trump put up a 50 foot flag pole ... 30 foot flag pole. The city agreed. So Trump brought in the company who does Golf course construction had them build a 20 foot ...
  • Interesting Donald Trump American Flag Pole "Negotiating ... Interesting Donald Trump American Flag Pole "Negotiating" Triumph ... had them build a 20-foot high grassy hill and put the 30-foot flag pole on top of that. ...
  • Did Donald Trump mount his flag on a man-made hill at Mar ... Trump put up a 50 foot flag pole ... So Trump brought in the company who does Golf course construction had them build a 20 foot high grassy hill and put a 30 ...
  • Jun 16, 2016 | Cars & Trucks

    1 Answer


    Hi there my name is Brandon I am a mechanical n electronic engineering technician I would check the cats!! And you also have a speed control sin!!! Their is two of them

    Feb 01, 2016 | Cars & Trucks

    3 Answers

    The question about a rear vibration on a new 2015 gmc yukon xl denali should and that the dealership has five other 2015 denali that have the same problem

    vibrations in a vehicle come from a drive shaft problem The fault normally starts to show up at about 40mph and lasts up to 70mph. It is described as harmonic in that it "throbs" in waves (harmonic) The vibrations can be from tight "U" joints in the drive line or from misalignment of the drive shaft. To understand this the diff angle at the pinion has to be the same as the transmission angle at the start of the drive shaft. For example --if the transmission is down at the rear by 2 degrees from the horizontal line then the diff angle at the pinion has to be 2 degrees up on the horizontal line to maintain the angular phasing of the joints. Some vehicles run a center bearing in the drive shaft and this brings into extra calculations to maintain the angular phasing of the joints For "U" joints to run properly there needs to be at least 1/2 a degree angle so that the needle rollers in the joints roll around to reduce wear. That means that if there is a center bearing mount in the drive line the angles that the drive shaft operate at have to be calculated correctly to maintain the correct phasing of the joints. For several new vehicles to have the same problem I would say that it is an assembly problem where components have not been assembled correctly according to the drive line angular requirements ( wrong transmission mounts/cross members) wrong center bearing mount bracket or wrong diff angle for the wheel base length. To fully understand what I am trying to say go on line to hardie spicer drive line angles and calculations. To have your vehicle checked take it to a drive line accredited shop and have the angles checked. If you find what I am saying then have them prepare a report for the dealer workshop and have it fixed under warranty.

    Nov 04, 2014 | Cars & Trucks

    1 Answer

    Horizontal Angle reading on 56-CST205 tOTAL sTATION NOT CHANGING

    if your horizontal angle reading is not changing, then either you have the horizontal hold on, where you can rotate the station and the angle readings remain the same, or You have a problem with the horizontal encoder or main circuit board, probably the main circuit board. If it's a hold button then just press it and things should go back to normal. If not then you'll have to bring it to a service shop. You might be able to get CST to sell you s new board, though most likely not since they were bought by Bosch, but the encoders need realigning. That requires an o-scopes to bring the encoder reading in line.

    Mar 19, 2013 | Cars & Trucks

    1 Answer

    2000 vauxhall vectra 2ltrdiesel will not start when left parked on hill for more 3 hours will start no problem on the flat or facing down hill

    check for a fuel leak along the line. some where you have a loose fitting ie at the fuel filter, fuel line that is allowing the fuel to drain back to the tank The angle of the vehicle shows that airis being sucked into the system somewhere

    Jan 05, 2013 | Cars & Trucks

    1 Answer

    How do you replace an alternater in a 1997 dodge ram 150 truck


    You will be needigng the below;

  • New alternator
  • Socket wrench set
  • Torque wrench

  • Determine which alternator your Dodge Ram will need. You'll want to be sure the new alternator is compatible with your Ram's engine. A Dodge Ram made after 2001 may be equipped with a 3.7 L, 4.7 L, 5.7 L Hemi V8, 5.9 L Magnum V8, 5.9 L Cummins diesel, 6.7 L Cummins diesel, 8.0 L Magnum or 8.3 L Viper engine.

    Disconnect the negative battery cable with a socket wrench. Remove the accessory drive belt and disconnect the wiring harness from the alternator. You will also need to remove the support bracket with a socket wrench for 3.7 L, 4.7 L and 5.7 L engines.

    Take the mounting bolts off of the alternator with a socket wrench and remove the alternator assembly.

    Install the new alternator assembly. If you have a 3.7 L engine, tighten the horizontal bolts to 42 foot pounds and the vertical bolt to 29 foot pounds with a torque wrench. Torque the long horizontal bolt and vertical bolt to 41 foot pounds and the short horizontal bolt to 55 foot pounds for a 4.7 L engine. Torque the mounting bolts to 30 foot pounds for all other engines.

    Connect the wiring harness to the alternator, install the accessory drive belt and connect the negative battery cable.

    I hope this helps.

    Good luck.

    Nov 30, 2010 | 2000 Dodge Ram 1500 Truck

    1 Answer

    How do you adjust a headlight from pointing up to the right height

    1. Park the vehicle on a level surface approximately 7.6 meters (25 feet)
    from a vertical wall or screen directly in front of it.

    2. Measure the height from the
    center of your headlamp to the
    ground and mark a 2.4 meter (8
    foot) horizontal reference line on
    the vertical wall or screen at this
    height (a piece of masking tape
    works well). The center of the lamp
    is marked by a 3.0 mm circle on the
    headlamp lens.

    3. Turn on the low beam headlamps to illuminate the wall or screen and
    open the hood.

    4. On the wall or screen you will
    observe a light pattern with a
    distinct horizontal edge of high
    intensity light with a slight angle
    towards the right. If this edge is not
    at the horizontal reference line, the
    beam will need to be adjusted.

    5. Locate the vertical adjuster on
    each headlamp, then use a 4 mm
    socket/wrench to turn the adjuster
    either counterclockwise (to adjust
    down) or clockwise (to adjust up)
    aligning the upper edge of the light
    pattern up to the horizontal line

    Mar 09, 2010 | 2002 Ford Explorer

    1 Answer

    1990 ford diesel non turbo

    it sounds like your fuel lines aren't maintaining pressure and the angle is allowing too much fuel to drain out of the lines. i have the same issue with and older f350 diesel if i let it sit a while and it doesn't get started.

    Jun 06, 2008 | 1995 Ford F350

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    60 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts


    Level 3 Expert

    78919 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    john h

    Level 3 Expert

    13614 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides