Question about 2006 Ford Fusion
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: head bolt torque spec
Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.
Posted on Aug 16, 2009
engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°
Posted on Jan 21, 2010
Testimonial: "This is the exact info I have been trying to get and is very helpful"
You need to buy the manual, because you also need to know the order in which to torque them.
usually you start at the middle and circle outward.
But they can differ. Some cars you always need to put in new head bolts. Others are done in several stages. This is too critical to take chances on.
If you really can't afford $19 for a manual, go to the library and xerox the pages.
Posted on Feb 09, 2010
Tips for a great answer:
Dec 21, 2015 | 1998 Ford Windstar
Dec 18, 2015 | Ford Cars & Trucks
Dec 18, 2015 | Cars & Trucks
Jun 10, 2010 | 2006 Nissan Titan
Nov 17, 2009 | 2006 Chevrolet Cobalt
Sep 15, 2009 | 2006 Ford Five Hundred
May 27, 2009 | 1999 Ford Taurus
Feb 05, 2017 | 2006 Ford Fusion
177 people viewed this question
Usually answered in minutes!