Question about 2004 Cadillac Deville

1 Answer

How do get the engine to crank or turn

Lost keys. Got a new PK3 key programmed and it works and tuns the ignition on, the car won't crank . Battery fully charged and just replaced the starter. HELP

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cadillac Master
  • 44,530 Answers

Check that you have put the small wire on the correct terminal of the starter solenoid. The solenoid will require power from the ignition switch to close the contacts the make the starter spin

Posted on Jan 10, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ronald_kate_
  • 111 Answers

SOURCE: I have a 98 Cadillac Catera. The problem is when I

Hello, from the description that you have given I think you may be right, I think that the switch has passed its use by date. However have it checked by an auto electrician to confirm this before spending to much money. Best of luck with it, hope this helps.

Posted on Nov 05, 2009

greg_margo
  • 1959 Answers

SOURCE: replaced the battery and alternator.car wont start

It's a bad starter. A bad starter will function when it's cold but once it heats up, it requires more power to get it to work.

Posted on Jul 13, 2009

  • 2 Answers

SOURCE: Troubleshooting car starting problems for a 93 Cadillac Deville

this happen with my 93 ,if the car cranks,it's your gas presser regulator. it's on the top of the engine ,right side of carb.

Posted on Jan 26, 2009

  • 564 Answers

SOURCE: i have 2003 cad cts mt new battery,new starter

does the vehicle have an anti theft device on it if so it may need to be reset. usually all you have to do is unlpug the negative batt cable. for about 5 mins.and reconnect it. if this does not solve the problem look i the owners manual to see how to override the system.

Posted on Dec 11, 2009

drsinister69
  • 2317 Answers

SOURCE: Doesn't start- Thought starter was bad replaced

The ignition switch attached to the column is probally bad, check the small wire to the sloenoid for battery when the key is turned to the start postion, if no battery, your not getting power from the ignition switch to the starter solenoid.

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I recently bought a 2002 Cadillac deville the steering column has been changed and the car will not start


Cadillac Deville 2001 won't start, engine won't ... - CarGurus

www.cargurus.com > Questions > Cadillac > DeVille

CarGurusJan 21, 2014 - Cadillac Deville 2001 won't start, engine won't turn over - My cadillac won't start. ... Crank not starting - service theft system in dash: There are 2 starter ....I have a 2002 Cadillac ... that all of a sudden stopped turning over ...

2001 cadillac northstar cranks but wont start. - YouTube

? 3:50
https://www.youtube.com/watch?v=t5SBKPut7G8
Mar 30, 2014 - Uploaded by eastcoasthoopty
2001 Cadillac wont start thought it was the chip in the key but it was ... I have a 2002 Seville In the morning I start my car noproblem, once its ...

Cadillac Deville 2001 won't Start - YouTube

? 0:43
https://www.youtube.com/watch?v=aUdX_Vnt1qI
May 10, 2013 - Uploaded by Shane Moore
Cadillac Deville 2001 won't Start .... i have a 2002 cadillac DTS. My issue is it will not idle, it will not start unless you have your foot to the gas all ...

2001 cadillac deville starting problem - YouTube





Dec 29, 2015 | Cadillac Cars & Trucks

1 Answer

After completing the 45 minute relearn procedure for a 2004 Pontiac Grand Prix message center Now says system not programmed


Relearn for what ? Anti theft system PK3 ? The relearn procedure is three 10 min. procedures for a total of 30 min.
30-Minute Relearn Procedure
Use this procedure after replacing the following components:
?€¢
The passkey III (PK3) keys


?€¢
The BCM


?€¢
The PCM, see important above

Important: This procedure is not available on vehicles equipped with option code (Z49).
If replacing a BCM with an GM SPO Replacement Part, perform the procedure to setup a new BCM prior to the 30-minute relearn procedure.

  1. With a master passkey III key, turn ON the ignition, with the engine OFF.
  2. Observe the STARTING DISABLED DUE TO THEFT message on the drivers information center (DIC), after approximately 10 minutes the STARTING DISABLED DUE TO THEFT message on the DIC will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. Important: The vehicle learns the key transponder information and/or passwords on the ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
  6. With a master passkey III key, start the vehicle. The vehicle has now learned the key transponder information and the PCM has now learned the fuel continue password.
  7. With a scan tool, clear any DTCs.

Dec 07, 2015 | Pontiac Cars & Trucks

1 Answer

Second Chip key for 2005 Aveo won't work


assuming the 2005 model year stil uses viper security systems...the chip in the key carries a magnetic resistance frequency. if the chip is damaged or corroded the frequency will change and wont engage the igntion. you can either get another key made (about 75 dollars) or bypass the ignition lockout feature.

May 18, 2012 | 2005 Chevrolet Aveo

2 Answers

I got a 1999 chevrolet tahoe. when i put the key in the ignition the head lights,and the dash light comes on but it won't even turn. i change the starter and got a new battery and it still won'


well if you have a dvom/voltmeter check the power at the starter terminals. the main terminal should have power all the time the key wire should have power only when the key is turned to crank engine. if you have power at both then i would start looking at grounds

Mar 30, 2012 | 1999 Chevrolet Tahoe

1 Answer

Hi, I have a suzuki swift 2000 model, the key has snapped in the ignition, i have a used replacement ignition barrel and key. When fitted the engine turns over but won't start. I'm guessing th


This car has a chip key, you can't just put any old key in it it must be programmed to not turn on the security system and disable starting, which is what you have now, the system has locked you out.

Feb 10, 2012 | Suzuki Swift Cars & Trucks

2 Answers

I put the wrong key in the ignition and had to have ignition replaced. so have new keys that are not programmed to my car.


Take it to a dealer.. only they can program a "master" key. then you can program the second key by starting the car with the master then removing the key and then starting the car with the second key within 5 seconds.

Dec 28, 2011 | 2003 Buick Rendezvous

1 Answer

98 chevy cavalier turns over but won't start


i know industry jargon can be confusing, but lets try this. if it turns over but won't start, it could be your ''ignition module'' that sits on top of the vave cover on the motor or it might be the fuel pump or filter. make sure when you crank the engine that the key is all the way turned or it may not always make a proper contact to activate the ignition module. iv'e seen this before & had to change the ignition switch & all worked ok after that. i would need to know engine lt size to give you more details on the matter. please get back to me.

Nov 19, 2011 | 1998 Chevrolet Cavalier

1 Answer

My 2000 grand prix needs the key reprogramed. I lost the original key and now the new one wont program on its own.


Make sure you have the right type of ignition keys, there should be a stamp on the keys "PK3" which is the right ignition keys you need to have for your passlock system.

Auto Relearn:
Time required, approximately 10 minutes.

Insure that the battery is fully charged.
Turn the ignition switch from the OFF position to the CRANK position attempting to start the vehicle. The vehicle will start and then stall.
Leave the ignition switch in the ON position while observing the security indicator.
When the security indicator turns off, which can take up to 10 minutes, turn the ignition switch off. Wait 10 seconds.
The BCM and the PCM will learn the new code on the next start attempt.

You may have to get somebody with a scan tool to reset the computer codes to make this work.

Thank oyu for using fixya and good luck

Aug 24, 2010 | 2000 Pontiac Grand Prix

1 Answer

How do I program my key for my 2006 Chevy Impala?


Add Duplicate Key (PK3 or PK3+ key)
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.
Originate New Master Key (PK3 or PK3+ key)

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position.
The security light on the dash will illuminate and stay on for ten minutes.
2. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back to the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
3. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back on the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
4. After the security light has gone off the third time, the key has been programmed
into the vehicle’s computer and will operate the car. It has replaced ALL the
previous electronic key codes and is the ONLY key programmed into the
vehicle’s computer.

Add Duplicate Key (PK3 or PK3+ key)

1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.

May 20, 2009 | 2006 Chevrolet Impala

1 Answer

Recoding "spare" key for car after ignition cylinder was replaced


Add Duplicate Key (PK3 or PK3+ key)
1. Insert an existing working key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.

May 12, 2009 | 2002 Pontiac Grand Am

Not finding what you are looking for?
2004 Cadillac Deville Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...