Question about Suzuki Jimny
M13A ENGINE 2007 MODEL
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: valve timing check
Chain drive. Unless the engine's been apart, why would the cam/valve timing change?
Valve clearances are another matter, and unless you want to remove the camshafts, get a mechanic who has the proper Suzuki tool to do them for you. You can measure the clearances, but the shims are between the cam lobe and the valve bucket, and the special tool holds the bucket down whilst changing to a thicker or thinner shim.
Posted on Sep 21, 2009
SOURCE: I have just replaced the crankshaft bearings on my Suzuki Jimny M13A and found out that when I start the engine it will not stay idle. I disconnected the sensor in front of the camshaft and it stays i
dude your electronic ignition system has gone bust... you will have to replace the engine mapping chip, but good luck finding it... I tried to no avail.
Tell me if you get it though.. Goodluck :)
Posted on Jan 22, 2010
Tips for a great answer:
Sep 11, 2016 | Suzuki Jimny Cars & Trucks
Apr 15, 2015 | 2007 Suzuki Jimny 1.3
Mar 01, 2015 | 2006 Suzuki Jimny 1.3
May 01, 2014 | 1987 Suzuki Samurai
Mar 26, 2014 | 2006 Suzuki Jimny 1.3
Sep 05, 2013 | Suzuki Vitara Cars & Trucks
Apr 22, 2009 | Suzuki Samurai Cars & Trucks
Apr 15, 2009 | Suzuki Aerio Cars & Trucks
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: