Question about Hyundai Accent
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 throttle position sensor
The sensor is on the side of the throttle body, it has three wires going to it, it is connected to the throttle blade so when the throttle is opened it reads that info and sends it to the PCM.
Posted on Sep 02, 2008
SOURCE: 2002 Hyundai Accent Problem
first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
Posted on Sep 28, 2008
P1529 means nothing more than the TCM (transmission control module) has
requested that the ECM (engine control module) turn on the check engine
P0734 basically indicates that your transmission is slipping.
You need to take this car to an authorized repair center for hyundai cars. Replacing the filter and fluid on the transmission might save this transmission but I would be willing to bet that a total transmission rebuild is in order.
Posted on Jan 02, 2009
DID THE BELT BREAK AND THEN IT WAS CHANGED. If so then you may have bent valve. IF NOT then vehicle may be timed wrong. Here is a diagram of your timing marks, http://www.2carpros.com/car_repair_information/tec_info/2002/hyundai/accent/2002_hyundai_accent_timing_belt_diagram_marks.htm contact if you need more help. Thanks for using FIX YA
Posted on Jan 23, 2009
i have a 2005 hyundai both back doors would not open from the outside . after taking the panel off i found out that the handle is completely plastic and that it had broke in half because off stress . i removed the handle ( which was a pain ) and used quick drying epoxy on the crack . then i put a thin piece if aluminum on each side of the crack and used the same epoxy to hold it on . the next day i put the handles back on ( after letting the epoxy dry ) and it has worked perfect ever since. my next recourse , if it breaks again , is go to ebay . there is a seller if you type in hyundai door handles that sells 2 after market ones for $39.99. they fit 2001 to 2005 . i hope that this helps .
Posted on Mar 09, 2009
Tips for a great answer:
Jan 02, 2017 | 2002 Hyundai Accent
Jan 03, 2015 | 2002 Hyundai Accent
Dec 17, 2012 | 2002 Hyundai Accent
Oct 09, 2012 | 2002 Hyundai Accent
Nov 30, 2011 | 2002 Hyundai Accent
Jun 30, 2011 | 2001 Hyundai Accent
Feb 05, 2011 | 2002 Hyundai Accent
Jul 27, 2010 | 2002 Hyundai Accent
Aug 06, 2009 | 2001 Hyundai Accent
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: