Question about Nissan Altima

Open Question

How to replace nissan altima steering lock assembly

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
tommyboinow
  • 324 Answers

SOURCE: 1994 nissan altima power steering pump leak

it has one bolt. and yes go to the autoparts store with the o rng and they can match it up, the o rings are known for rotting and make it leak....

and yes the hose could possibly be loose.

Posted on Nov 26, 2008

Ad
volvo2103
  • 122 Answers

SOURCE: replacing a nissan altima sunroof

it should....same body style....

Posted on Feb 03, 2009

  • 880 Answers

SOURCE: 2000 nissan altima will not stay locked. the

That or the alarm system is faulty.

Posted on Feb 16, 2010

  • 1915 Answers

SOURCE: 2009 nissan altima with continuosly flashing

the air bag has a clockspring that is probably broken, but I'd check for a sensor that is not hooked up before I replaced it.

Posted on Feb 05, 2011

  • 376 Answers

SOURCE: I own a 2005 nissan

Most all of your power steering fluids are basically all the same.But you should also look in your owners manual for recommended fluids and lubrication's for your specific vehicle.

Posted on Feb 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much is a steering shaft for a 05 Nissan Altima?


$147.60 for 2005 Nissan Genuine OEM Steering Assembly

Mar 09, 2013 | Cars & Trucks

2 Answers

Procerure to replace wheel bearing assy 2004 nissan altima 4cyl


Go to YOU TUBE and put in replacing wheel bearing hubs for
nissan altima & watch

There is a lot to see even if on a different vehicle

I doubt you have the tools to do the job

Sep 19, 2012 | Nissan Altima Cars & Trucks

1 Answer

My f'in steering wheel is locked on my 98 altima n i cant start my f'in car wtf do i do?


yank the f'in steering wheel side to side while trying to cycle the key to get the f'in thing unlocked???

Jun 23, 2012 | 1998 Nissan Altima

1 Answer

On my altima 96 when I'm parking or turning extremely slow the steering wheel somewhat locks


Hi, can you tell if it's the lock in the steering column or something with the power steering instead? If it feels like the power steering, check the belt for looseness and tighten as needed. If it feels like it's in the column, your locking assembly may be coming loose inside. Below is a procedure for removing the steering wheel lock for inspection. Please let me know if you have questions, and thanks for using FixYa.


REMOVAL & INSTALLATION The steering lock/ignition switch/warning buzzer switch assembly is attached to the steering column by special bolts whose heads shear off upon installation. The bolts must be drilled out to remove the assembly or be removed with an appropriate tool. The bolts may also be removed with a hammer and chisel by notching the bolts and tapping them counterclockwise with the hammer and chisel.
The ignition switch or warning switch can be replaced without removing the steering lock assembly. The ignition switch is on the back of the assembly and the warning switch is on the side.


CAUTION The models covered by this guide may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in Chassis Electrical .

  1. Disable the air bag system by disconnecting the negative battery cable and waiting at least 10 minutes, prior to starting this procedure.
  2. Remove the steering column covers.
  3. Remove the steering wheel.
  4. Remove the spiral cable assembly.
  5. Remove the combination switch from the steering column.
  6. Remove the steering column support nuts and lower the steering column.
  7. Disconnect the ignition switch wiring.
  8. Remove the bolts that secure the steering lock and remove the steering lock assembly.

To install:
  1. Install the steering lock assembly and secure with new shear type bolts.
  2. Connect the ignition switch wiring harness.
  3. Raise the steering column and secure with mounting nuts. Tighten the mounting nuts to 11-14 ft. lbs. (15-19 Nm).
  4. Install the spiral cable assembly.
  5. Install the combination switch.
  6. Install the steering column covers.
  7. Install the steering wheel.
  8. Connect the negative battery cable.

Apr 04, 2011 | 1996 Nissan Altima

1 Answer

I need to replace plastic cover of instrument/odometer on my 2007 Nissan Altima, how do I get he cover off?


you have to remove the whole meter cluster assembly. lower down the steering column and you'll find it easy to remove it.

Jul 07, 2010 | 2007 Nissan Altima 3.5 Sedan

2 Answers

After replacing a cv shaft, will the car need a


Not unless you had to remove or dis-assemble any steering or suspension components. If your wheel is in the straight position while driving and you not fighting to keep it straight than no. But at the same time, an alignment would not be a bad idea to have done and is not a huge cost.

Jan 18, 2010 | 2003 Nissan Altima

1 Answer

My steering wheel in a nissan altima is gering hard


Hi:
If your steering is getting hard to turn, there are a few easy things to check before you assume the worst.. Open the hood and check to see if your power steering pump reservoir is full of fluid and the belt is on and tight. If these all look good, you most likely have some friction or binding in your steering rack and pinion assembly,and that is replaced as an entire unit.

Nov 16, 2009 | 2002 Nissan Altima

1 Answer

Igition won't turn and steering wheel is locked


remove the plastic covers from steering wheel,there is a little hole if you use a small pick and push up on the lock.

Apr 16, 2009 | 1998 Nissan Altima

1 Answer

Power steering


Sounds like a bad steering rack & pinion assembly... is it only bad in one direction or both...?
If both then it's the rack assembly... Hope this helps...;-)

Apr 13, 2009 | 2005 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...